T15 Transmission/transfer Case Mount

I ordered a replacement transmission mount (J1370910). I have the original bolts that connect it to the transmission but the new mount didn’t come with the threaded studs that screw into the two holes on the bottom and that connect to the cross member. (Pictured). Anybody have the part number for those? I know this set up was used on many years and Jeep vehicles during that time. Are these anything special or would a run of the mill decent grade threaded stud work from a local hardware store?

 

Pretty sure they are nothing special. I'd have to check the parts book later.

Typically studs are high-grade bolts anyway, so I'd just use what fits. IIRC Napa has a pretty good assortment, or try an Ace hardware store. Or order from McMaster-Carr www.mcmaster.com

 

Our local tractor supply keeps a good supply of bolts also. Grade 5 and grade 8 . however they may have studs too.

 

Parts book says 2 studs are required; PN 948622. I find nothing online for these. You're going to have to find a work-alike from whatever the hardware stores have.