1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

The Sears David Bradley Trailer

Discussion in 'Jeep Trailer Tech' started by maurywhurt, Mar 19, 2010.

  1. Aug 4, 2013
    Mr. Gangrene Jeans

    Mr. Gangrene Jeans I See Voices&Hear Visions

    Kansas City
    Joined:
    Jul 17, 2009
    Messages:
    282
    Well, after seeing David Bradley trailers with the roadster fenders here over three years ago, I finally got mine. It was in an ad on Craigslist less than 40 miles away. Price was more than I paid for my Jeep. From the information provided on this site, looks like a 1950 or 1951. Data plate is centered on top rail, somewhat corroded. The 4 is stamped low, and very lite, 231-417 109xx. The coupler has been changed to a 2", axle is C-channel, short backstrap hinges, 16" DB tractor wheels. At some point the tires were replaced with 7.60 x 16's. Too tall and wide, wheel spacers keep them from rubbing the body. Similar dents on each side fender. Seems solid, cleaned some wadded up add on tail light brackets and wiring off. Plan to find another pair of stock 15" JEEP steel wheels to match the Matchbox. What color do you think it will be next time you see it? Chain hooks look factory to me.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    Last edited: Aug 11, 2013
  2. Aug 4, 2013
    Chris Insull

    Chris Insull All roads lead me back to the beach... 2023 Sponsor 2022 Sponsor

    Chesapeake, VA.
    Joined:
    Sep 22, 2002
    Messages:
    805
    Great find!! I'm looking for one as well...
     
  3. Aug 11, 2013
    jossar

    jossar Member

    Freedom, WI
    Joined:
    Sep 17, 2012
    Messages:
    199
    I finally managed to find one today Craigslist about 100 miles from here. From what I've been reading here it appears to be one of the transition (1947?) Dubar Kapple trailers like the one on p.13. It is model number 231,246 serial number 4325. The serial number is below and right of the tongue and screwed on so I believe that the one of P. 13 is the in the original location. It has 16" wheels (not the tractor ones with the weight holes), double knuckle tailgate hinges, Triangle taigate gussets , Square axle and the original wood rack. It also has a couple other things which I can't tell if they are added or original. If added, they did a good job. There is a side step on the left side, a bracket for the taillight on the left welded to the top rail and a bracket for the screw jack. The hitch appears to have been changed but it should be reversable. Heres a couple pictures.


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]



    [​IMG]



    [​IMG]



    [​IMG]

    [​IMG]


    [​IMG]
     
    Last edited: Aug 11, 2013
  4. Aug 13, 2013
    maurywhurt

    maurywhurt Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Western North...
    Joined:
    Dec 12, 2009
    Messages:
    873
    Very interesting find!

    Now that a second Model 231-246 has surfaced with the data plate in the same location as the one shown on Page 13 (http://www.earlycj5.net/forums/show...ars-David-Bradley-Trailer&p=941915#post941915), I agree that both plates are indeed in their original locations on the front of the frame rail.

    I can't tell for sure from your photos, but it may be that the original coupler has simply been moved from the top of the tongue to the bottom (perhaps by someone attaching it to a vehicle with a low trailer hitch?) Is it for a 1-7/8" or 2" ball? The original couplers were 1-7/8".
     
  5. Aug 13, 2013
    jossar

    jossar Member

    Freedom, WI
    Joined:
    Sep 17, 2012
    Messages:
    199
    I'm pretty sure the coupler is not original - looks to be newer than the ones in the catalog photos. It's 1 7/8" . It's welded on but could easily be cut off when I find the correct one - any leads would be welcomed. Plan is to restore it to as close to original as possible. After looking back through the photos I guess it's possible it's original just moved and welded on. There aren't any real good close up photos of an original one. Are they marked anywhere?

    [​IMG]
     
    Last edited: Aug 13, 2013
  6. Aug 13, 2013
    maurywhurt

    maurywhurt Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Western North...
    Joined:
    Dec 12, 2009
    Messages:
    873
    It looks to me like you have an original coupler that has been welded underneath the original tongue, instead of being bolted to the top of it. Check out the coupler in these photos. It appears to be the same one, though yours has a different hand wheel shape: http://www.earlycj5.net/forums/show...ars-David-Bradley-Trailer&p=825082#post825082

    I've looked for 1-7/8" hand wheel couplers before, but have not had any luck in locating one. If you aren't able to restore the one you have given that it's been welded, Fulton (which made the original couplers for these trailers) still makes a very similar 2" coupler: http://www.amazon.com/Fulton-Couple...139&sr=8-1&keywords=fulton+hand+wheel+coupler
     
  7. Aug 20, 2013
    Mr. Gangrene Jeans

    Mr. Gangrene Jeans I See Voices&Hear Visions

    Kansas City
    Joined:
    Jul 17, 2009
    Messages:
    282
    I was getting ready to pull the trigger on the Fulton 2" coupler above. Quite pleased to have found this one on eBay.

    http://www.ebay.com/itm/Vintage-260...ue&rt=nc&_trksid=p2047675.l2557#ht_589wt_1183

    It is the right style, color, and vintage, matches the oversized hitch ball I have, knob looks like the one on my torch bottles, made in Kansas City (back when we were somewhat of a steel town), price was right, and like Wile E. Coyote says "it's an Acme, what could go wrong?".
     
    Last edited: Aug 20, 2013
  8. Aug 20, 2013
    jossar

    jossar Member

    Freedom, WI
    Joined:
    Sep 17, 2012
    Messages:
    199
    I was watching that one and actually put in the first bid. After I finally got a response to my question on the center to center hole distance I decided it wasn't going to fit the factory holes (4" on center ) and I didn't want to drill another one so I was hoping to be outbid. Thanks. Nice old hitch though.
     
  9. Sep 19, 2013
    Mr. Gangrene Jeans

    Mr. Gangrene Jeans I See Voices&Hear Visions

    Kansas City
    Joined:
    Jul 17, 2009
    Messages:
    282
    Well the 5.5 wide JEEP wheels with 215-75R-15 tires rubbed on the springs and the body. Cut the C-channel axle in the center and redrilled the spring center bolt holes. Moved each half axle out 3/4" (1.5" total). Used a seat bracket to fill the gap and am getting ready to weld in a piece of seamless 1-5/8" tubing for reinforcement. Shouldn't have been a big job but one of the axle end spindle is bent and took awhile to find it's happy place. Wire brushed the bottom while I had it turned over, hope to prime and paint this weekend.
     
  10. Oct 16, 2013
    airdreams1

    airdreams1 New Member

    Joined:
    Oct 16, 2013
    Messages:
    1
    I have one just like this..... But the Sears name/model plate is on the other side in the same location & it uses a 12" wheel.......
    My buddy is using it @ the molment, but Ill post pics & model # as soon as I can.

    Ive been looking for a long time to find a spare wheel for it. does anyone here have one or know where I could get one?
     
  11. Oct 31, 2013
    jossar

    jossar Member

    Freedom, WI
    Joined:
    Sep 17, 2012
    Messages:
    199
    Found this on e-bay for $10. 1 7/8 - Looks like the right one. Need to replace the locking lever but otherwise it looks like it will clean up.

    [​IMG]
     
  12. May 3, 2014
    johnnyc

    johnnyc .

    Joined:
    Jan 29, 2010
    Messages:
    44
    Hello.... it's been along time :)

    Finally got some $$ to trow at the trailer .... got some tires

    they are an odd size... not too many make them anymore... 6.70x15 found them at tires-easy.com $81 each

    just need to find the time to put them on now LOL



    [​IMG][​IMG][​IMG][​IMG]
     
  13. Jul 20, 2014
    blockerjd

    blockerjd New Member

    Joined:
    Jul 10, 2014
    Messages:
    2
    Hi, all. I was recently given an old utility trailer by my mom that was previously her dad's (still alive) who purchased it new. During my search for some new tires (I'll come back to that subject) I came across this forum and was very surprised at the great information aggregated here. After acquiring the registration from my dad (don't think the actual title is still available) and reading all of your replies I am fairly certain I came into a 1949 David Bradley trailer with original accessories that is in really great shape. I've sent some pictures over to the thread administrator for him post. Although the serial plate is mostly illegible, the impressions show the model number to be 231-417 and it has most of the characteristics previously mentioned except for one area, the tail lights. Knowing my grandfather and the OCPD he passed down to me I'm pretty sure the trailer is mostly original with original railings, crossbars, and tarp except for a not-so-recent-but-in-good-shape paint job. I haven't seen similar tail lights on this forum, but most of the previous examples seem to be from earlier years so it could have been a design change, or it could be some after market work my grandfather performed. All that to describe another great manufacturing example from this era.

    My main question is if anyone can point me towards some new tires. The wheels seem to be the 16" tractor wheels that have been mentioned (although the rim measures closer to 18"), and they still have the original 16" by 6.0 AllState tires on them. They still ride fine, but are beginning to crack. I have searched every local place and most internet based distributors and have only found one 16"X6.0 tire that is apparently for the old Willys Jeeps. Here is the link: http://www.performanceplustire.com/products/productID/12015/antiqueTireDataID/3817. They also require tubes and rim guards. I just wanted to see if anyone else has found tires of this size, or if someone can confirm that these are ok to purchase. Thanks for all the information!

    [​IMG][/URL][/IMG]

    [​IMG][/URL][/IMG]

    [​IMG][/URL][/IMG]

    [​IMG][/URL][/IMG]

    [​IMG][/URL][/IMG]

    [​IMG][/URL][/IMG]

    [​IMG][/URL][/IMG]

    [​IMG][/URL][/IMG]

    [​IMG][/URL][/IMG]
     
    Last edited: Aug 15, 2014
  14. Jul 29, 2014
    jossar

    jossar Member

    Freedom, WI
    Joined:
    Sep 17, 2012
    Messages:
    199
    Last edited: Jul 29, 2014
  15. Aug 2, 2014
    jossar

    jossar Member

    Freedom, WI
    Joined:
    Sep 17, 2012
    Messages:
    199
    Been doing a few things here and there on the trailer. Packed the wheel bearings, new lug nuts and grease caps. New safety chains. Installed some period correct taillights, cut off the welded on hitch, painted and installed the fulton #7 and did some body work on the fenders. Need to get it sandblasted and painted yet. Trying to decide the color. Leaning towards Red with black tongue and inside and cream wheels or hunter green (like the hitch) with red wheels.

    [​IMG][​IMG]
     
    Last edited: Aug 2, 2014
  16. Aug 15, 2014
    blockerjd

    blockerjd New Member

    Joined:
    Jul 10, 2014
    Messages:
    2
    Thanks for the info jossar! Appreciate you pointing me towards some alternative, I always like options when purchasing something like this. Gotta admit, I kinda like the military profile though, what do you think? Also, finally got around to doing the photobucket thing and posted the pictures I've taken so far. When I get my hands on the other crossbars and tarp I'll post those as well.
     
  17. Nov 23, 2014
    ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Weatherford, TX
    Joined:
    Dec 30, 2002
    Messages:
    2,231
    Jossar,

    Like the tail lights. Where did you get them?
     
  18. Nov 25, 2014
    jossar

    jossar Member

    Freedom, WI
    Joined:
    Sep 17, 2012
    Messages:
    199
  19. Apr 12, 2015
    johnnyc

    johnnyc .

    Joined:
    Jan 29, 2010
    Messages:
    44
    Don't know if this pic will work... But... Got some promotional personalized emblems for my Bradley trailer ... They came in chrome ... So I sprayed them to match the body ...
    my David Bradley hard at work ... Leaves :)



    [​IMG]
     
  20. Sep 7, 2016
    optimisticjeepr

    optimisticjeepr New Member

    Howell, MI
    Joined:
    Sep 7, 2016
    Messages:
    5
    2012-09-05.jpg

    My 1947 David Bradley
     
    SKT likes this.
New Posts