1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

tire carrier hinge

Discussion in 'Early CJ5 and CJ6 Tech' started by termin8ed, May 27, 2004.

  1. May 27, 2004
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Wondering what works good for a swing hinge for a tire carrier.
    Anyone use an actual Hinge for the pivot? or is the "post with bearings" method the better way to go.

    Anyone have a source for a pivot? Or am I going to have to make up something?


    Most of your jeeps that I've seen had an "extra" bumper/crossmember mounted onto the stock rear crossmember so the tire carrier mounted to the top of the new bumper. I thought of doing something similar, but have a heavy duty hinge mounted to one end of the crossmember and new bumper so the whole bumper/tire carrier swung out as one. Am I making any sense?? ANyone else try this?
     
    termin8ed, May 27, 2004
    #1
  2. May 27, 2004
    panzer

    panzer Super Mod Staff Member

    Columbus, OH
    Joined:
    Dec 9, 2003
    Messages:
    1,245
    panzer, May 27, 2004
    #2
  3. May 27, 2004
    panzer

    panzer Super Mod Staff Member

    Columbus, OH
    Joined:
    Dec 9, 2003
    Messages:
    1,245
    panzer, May 27, 2004
    #3
  4. May 27, 2004
    John A. Shows

    John A. Shows Comic Relief

    Mendenhall...
    Joined:
    Sep 24, 2002
    Messages:
    938
    Brian, I've got something you can use but don't really know what it is.

    I believe it's a hub assembly of some sort.

    I'll have to get it out and take some pics of it.

    I had planned on using it myself but I found a Kayline carrier that already has the hinge part so I don't need it.
     
    John A. Shows, May 27, 2004
    #4
  5. May 27, 2004
    mruta

    mruta I drank with Billy!

    Downers Grove, IL
    Joined:
    Sep 22, 2002
    Messages:
    422
    COUGH! $120??? For a 1000# trailer hub? Sounds like McRuff is needed to come to the rescue here for a better (and cheaper) alternative. Mike, are you out there???
     
    mruta, May 27, 2004
    #5
  6. May 27, 2004
    John A. Shows

    John A. Shows Comic Relief

    Mendenhall...
    Joined:
    Sep 24, 2002
    Messages:
    938
    I think that's what I've got...a trailer hub.

    I believe it'll work fine for you Brian.

    Freebie too.
     
    John A. Shows, May 27, 2004
    #6
  7. May 27, 2004
    cj5 buggy

    cj5 buggy Member

    hardeeville, SC
    Joined:
    Dec 12, 2003
    Messages:
    403
    i used a trailer hub off of a boat trailer... a 3 axle boat trailer at that... i know it'll be okay for a at least a 38" tire...

    [​IMG]

    :beer:
     
    cj5 buggy, May 27, 2004
    #7
  8. May 27, 2004
    Project71-5

    Project71-5 BACON

    Gypsum, CO
    Joined:
    Sep 24, 2002
    Messages:
    897
    That Rockstomper hinge is the same as the one here:

    http://www.troutindustries.com/

    I bought just the tube and bought the spindle and bearings at TSC. Cheaper to buy the whole deal from Trout Industries though. ;)
     
    Project71-5, May 27, 2004
    #8
  9. May 27, 2004
    manden68

    manden68 Member

    O Fries Country
    Joined:
    Jul 16, 2003
    Messages:
    214
    manden68, May 27, 2004
    #9
  10. May 27, 2004
    vanguard

    vanguard

    Didn't lynn just do one of these?
     
    vanguard, May 27, 2004
    #10
  11. May 28, 2004
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Thanks guys. I'll have to check out these sites and see what I come up with.
     
    termin8ed, May 28, 2004
    #11
  12. May 28, 2004
    Rio_Grande

    Rio_Grande Member

    Southeast Indiana
    Joined:
    Sep 30, 2003
    Messages:
    59
    Trout industries has a good price for a good product. I use them on the bumpers I sell.
     
    Rio_Grande, May 28, 2004
    #12
  13. Jun 1, 2004
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    I did one quite awhile back. I recently sold an extra hinge to Quaggy for his project.
    Edit:
    This is the hinge Quaggy and I use.
    Item# 44-2100, I think it's 2nd down on the right side. 2000 Lb capacity sealed bearing hinge.

    http://kingmetals.com/Pages/Page25A-5.html

    Note that price shown is for a pair; sold only in pairs.
     
    lynn, Jun 1, 2004
    #13
  14. Jun 1, 2004
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Anyone need 1 hinge?? ;) :D
     
    termin8ed, Jun 1, 2004
    #14
  15. Jun 1, 2004
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Man I made mine out of a steel pin with a zerk fitting on the end, fit into a steel bushing with grease grooves that was welded into the tubing of the carrier frame, I just couldn't see all that money for a set of bearings that was never gonna spin.
    But then again I make most all of this kinda stuff because I'm Dutch like Boyink, nah make that down right cheap instead of dutch! :D
     
    Mcruff, Jun 1, 2004
    #15
    jeepstar likes this.
  16. Jun 1, 2004
    SouthWest 67-5

    SouthWest 67-5 What's on your mind?

    La Quinta, Ca
    Joined:
    Sep 24, 2002
    Messages:
    24
    Yea, Brian. I'm interested in one. I'm thinking of doing a tire carrier project.(Have a new welder)
    If you have to buy two, I'll take one off your hands, split the cost.
    Let me know.
    Wayne
     
    SouthWest 67-5, Jun 1, 2004
    #16
  17. Jun 1, 2004
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    I hear ya Mike. I just don't have many tools for working with metal. I'm going to look around and see what I can find.

    If I do decide to go with that set of hinges, I'll let you know Wayne.
     
    termin8ed, Jun 1, 2004
    #17
New Posts