1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

What's your other project (non Jeep) . . . show them off here!

Discussion in 'Quitters' Club' started by IRQVET, Mar 12, 2015.

  1. Dec 9, 2018
    lightner

    lightner New Member

    staunton, va
    Joined:
    Nov 27, 2018
    Messages:
    14
    i am very new to this site (any site) and i am not techno savy at all. i will try to load a photo. anyway, '73 xl 1000 is more of a hobby than a project. i project to keep it running
     
  2. Dec 9, 2018
    lightner

    lightner New Member

    staunton, va
    Joined:
    Nov 27, 2018
    Messages:
    14
    my device is not in agreement with server. file too large. big surprise
     
  3. Dec 9, 2018
    lightner

    lightner New Member

    staunton, va
    Joined:
    Nov 27, 2018
    Messages:
    14
    cannot forward photo, oh well
     
  4. Dec 13, 2018
    jeep2003

    jeep2003 Active Member

    Vestal NY
    Joined:
    May 30, 2006
    Messages:
    1,436
    Iv been messing around customizing hotwheels to match my real cars. Its fun because it only takes a few hours. I did 3 sofar still working on my cj5. Heres some before and after and the real thing.
     

    Attached Files:

    ojgrsoi likes this.
  5. Dec 13, 2018
    jeep2003

    jeep2003 Active Member

    Vestal NY
    Joined:
    May 30, 2006
    Messages:
    1,436
    heres the 66 mini and 46 willys
     

    Attached Files:

    ojgrsoi likes this.
  6. Dec 13, 2018
    Focker

    Focker I Hate Being Bi-Polar, It's Awesome. Staff Member Sponsor 2019 Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    5,945
    Nice job... Love the Jeep.
     
  7. Dec 14, 2018
    TIm E

    TIm E Member Sponsor 2019 Sponsor

    NW Arkansas
    Joined:
    Mar 2, 2017
    Messages:
    592
    914 (y)

    I have a 1974, love it.
     
    jeep2003 likes this.
  8. Feb 5, 2019
    FF47

    FF47 New Member

    Joined:
    Jul 29, 2009
    Messages:
    18
    Jeep Go Kart 2.jpg
     
    fhoehle and jeep2003 like this.
  9. Feb 5, 2019
    tomasinator

    tomasinator Member

    Joined:
    Aug 26, 2015
    Messages:
    195
    Someone gave me an old ham radio transmitter for free, circa 1955, but it didn't work. It was originally available pre-built or as a kit. This one was clearly a kit, based on the craftsmanship of the wiring and soldering underneath.

    [​IMG]

    The first problem to solve was why turning the main knob didn't cause the pointer to rotate.

    [​IMG]

    I removed all the knobs, some screws, and unsoldered the meter wires in order to remove the front panel to get at the dial vernier.

    [​IMG]

    I removed the vernier and disassembled it. The 60 year old grease had hardened like dry wall mud. I cleaned the parts and reassembled the mechanism with bicycle hub grease.

    [​IMG]

    I put the radio back together. The frequency dial now turned smoothly, but the transmitter still wouldn't transmit. I spent a few minutes every night for about a week trying to debug the problem. I found an inductor was too close to the band switch and arced to the metal ground and burned out the wire in the inductor.

    [​IMG]

    I found a modern inductor of 200uH in my junk box and replaced the burned out one. It didn't solve the problem. I was eventually able to track down a resistor that had nearly doubled in value. I replaced it with a new one. Another resistor was completely open and I replaced it.

    [​IMG]

    The resistor on top had doubled in value and the resistor on the bottom was completely open. After replacing both resistors, the transmitter now worked and is back on the air. Interesting that a 60 year old transmitter is still compatible with a modern radio built in 2019.

    [​IMG]
     
    Last edited: Feb 5, 2019
    jackdog, Twin2, OzFin and 3 others like this.
  10. Feb 7, 2019
    jeep2003

    jeep2003 Active Member

    Vestal NY
    Joined:
    May 30, 2006
    Messages:
    1,436
    I finished up my curio cabinet that took quite alot of work. Also got my little hotwheels jeep done. its not the best paint job but looks great in person. I had to make the top and roll bar from scratch. Before and after pics
     

    Attached Files:

    Dave Deyton likes this.
  11. Feb 7, 2019
    jeep2003

    jeep2003 Active Member

    Vestal NY
    Joined:
    May 30, 2006
    Messages:
    1,436
    Also just finished up this briggs cutaway. Very happy with it!
     

    Attached Files:

  12. Feb 8, 2019
    baldjosh

    baldjosh Sponsor Sponsor

    pacific north west
    Joined:
    Oct 24, 2017
    Messages:
    247
    the curio looks really nice!!!
     
    jeep2003 likes this.
  13. Feb 8, 2019
    jackdog

    jackdog Member 2019 Sponsor

    Finger Lakes NY
    Joined:
    Jul 16, 2013
    Messages:
    238
    That old Johnson Ranger Xmitter looks great. Looks like it was recapped also. I too love and restore old tube Ham radio stuff, especially Heathkit. How many of you guys are Hams? Stan WB3EIM
     
    Last edited: Feb 8, 2019
    tomasinator likes this.
  14. Feb 15, 2019
    OzFin

    OzFin Vintage Jeep Guy

    Michigan
    Joined:
    Jul 16, 2007
    Messages:
    513
    KG8HD
    Oz
     
  15. Feb 17, 2019
    fhoehle

    fhoehle Sponsor Sponsor

    Harford Township, PA
    Joined:
    Apr 11, 2012
    Messages:
    803
    IMG_20181014_173536.jpg
     
    IRQVET likes this.
  16. Feb 17, 2019
    fhoehle

    fhoehle Sponsor Sponsor

    Harford Township, PA
    Joined:
    Apr 11, 2012
    Messages:
    803
    Traded my other Farmall M about two years ago. Missed it ever since. Now traded the Ford 8n for a perfect running but a bit rough looking Farmall M. I missed the other one a lot. Now a build up for work and some Antique pulling. And the search is on again for another factory wide front.
     
    IRQVET and dozerjim like this.
  17. Feb 20, 2019
    3b a runnin

    3b a runnin Sponsor Sponsor

    virginia
    Joined:
    Jan 11, 2015
    Messages:
    650
    I recently found another blade for my baby Deere. This one got mounted with the 3 point hitch with home made adapter to the front end. Took the quick detach bucket off and built the adapter to match the quick detach on the boom arms.
    [​IMG]
    Really just for snow.
     
    montanacj and Twin2 like this.
  18. Mar 7, 2019
    jeep2003

    jeep2003 Active Member

    Vestal NY
    Joined:
    May 30, 2006
    Messages:
    1,436
    Doing an engine swap on my Rockford tora. I had a 175 yamaha 2 stroke on it but I wanted a more easy to deal with bike that i could just jump on and go. The yamaha engine was hard to start because it was pretty cobbled on there it had a crappy clutch and no second gear and very hard to shift. plus no kick starter. So Im putting on a 90cc china engine its kick start and 4 speed. Im making a very good effort to get it working as easy and reliably as possible so i dont have to screw around every time i want to ride. Its going really well
     

    Attached Files:

    3b a runnin and ITLKSEZ like this.
  19. Mar 7, 2019
    3b a runnin

    3b a runnin Sponsor Sponsor

    virginia
    Joined:
    Jan 11, 2015
    Messages:
    650
    I love these kind of bikes, not horsepower monsters, just fun. We, siblings and I, had a 71 Kawasaki trail boss when I was a kid. 100cc I think. Would love to have that bike now.
     
    jeep2003 likes this.
  20. Mar 7, 2019
    Chuck

    Chuck Sponsor Sponsor

    Southshore Ma
    Joined:
    Sep 19, 2004
    Messages:
    1,357

Share This Page

New Posts