1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Winch Bumper

Discussion in 'Winches' started by termin8ed, Feb 10, 2020.

  1. Feb 10, 2020
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    2,682
    Warn 8274 Winch Mount

    Starting it off with this mountimg plate. Looking to get a piece of steel tomorrow for the bumper. I bent the origonal 2 years ago and need something better to attach tow bar onto also.

    Need to quit stalling and get moving so its ready for the spring
     
  2. Feb 10, 2020
    jeeper50

    jeeper50 jeeps 'till I die

    Gawja
    Joined:
    Dec 20, 2007
    Messages:
    507
    I used a piece of 4 channel for my bumper. The mount plate looks great I wish I would have had that option, saves time
     
  3. Feb 10, 2020
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    2,682
    Somebody posted the link somewhere else on the site. I just finally got around to ordering it:D
    Hoping to find some rectangular tube stock about the same size as the stock crossmember.
     
  4. Feb 10, 2020
    Twin2

    Twin2 wasn't me 2020 Sponsor 2019 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    3,961
    rectangular tubing you say
    home made bumper . same as rear too
    winch bumper - Copy.JPG
    but some guys don't like the high mount
    I myself never had a cooling problem
     
    jeeper50 likes this.
  5. Feb 10, 2020
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    2,682
    Im going to try my best to drop it down as far as i can
     
    jeeper50 likes this.
  6. Feb 11, 2020
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    2,682
    [​IMG]

    4x2", 1/8" thick
    Picked up a piece of 1/4" plate also. Once i get the mount plate and figure out a plan ill get some more bits and pieces
     

Share This Page

New Posts