1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Windshield Glass Replacement - Need Some Advice

Discussion in 'Intermediate CJ-5 and CJ-6 Tech' started by 74CJ5 Renegade, Sep 6, 2019.

  1. Sep 6, 2019
    74CJ5 Renegade

    74CJ5 Renegade Member

    Houston, TX
    Joined:
    Dec 1, 2002
    Messages:
    276
    Sooo.... in removing my windshield to get some parts powder-coated I managed to crack the windshield glass.

    I called Safelite and fell out of my chair when I was quoted $440!!!!

    I found the glass on Quadratec for $139 or OC Auto Carpets for $85. (I think mine has the green tint)

    Fairchild Industries Replacement Windshield Glass for 68-75 CJ-5, CJ-6

    1968-1975 Jeep CJ5 WINDSHIELD, GREEN TINT | Online Store | Car & Truck Interior Carpet

    Any downside to the $85 glass????

    Is the weatherstrip seal two piece or one piece or is the seal the same but the first one does not include the locking strip?:

    Crown Automotive J0978995 Windshield Weatherstrip for 49-75 Jeep Vehicles

    1959-1975 Jeep CJ5 WEATHERSTRIP AND LOCKING STRI | Online Store | Car & Truck Interior Carpet

    How hard is it to remove / replace the glass? I will be doing it with the windshield lying on a table. Seems like the 'rope trick' is the best installation method.

    Easiest to just cut out the old gasket with a utility knife? Really no clue on the process.... my only experience with windshield replacement is what I have seen on the car restoration TV shows and a few YouTube videos!!!!!

    Thanks for the help!!!
     
    Hellion likes this.
  2. Sep 6, 2019
    Iandavidh

    Iandavidh Member

    California
    Joined:
    Sep 24, 2018
    Messages:
    155
    There’s an article from the 90s that goes through a windshield replacement. I’ll go see if I can find it(y)
     
  3. Sep 6, 2019
    Iandavidh

    Iandavidh Member

    California
    Joined:
    Sep 24, 2018
    Messages:
    155
    671B5454-1897-4947-AFDC-69BE8F3FD543.jpeg 8D7E3267-1F81-45D3-B2BE-440500E1D415.jpeg 7291D133-3114-4F90-B5F2-EAE9F2CF029B.jpeg C4BE0A68-761C-46E5-9C32-A1F2307FF534.jpeg 7DEE9F71-A671-4AD2-AF13-DC27FDD83E39.jpeg D260A076-80F9-4AEC-8560-DDE8446CC617.jpeg
     
    Hellion and Focker like this.
  4. Sep 6, 2019
    Alan28

    Alan28 Well-Known Member Sponsor 2019 Sponsor

    Châtillon en...
    Joined:
    Oct 21, 2012
    Messages:
    1,590
    For a half-windshield I paid 130 euros it was securit glass and 2 corners were round/curb this increase the price. Windshield in 2 parts for export tropicalised or something like that.
    It was some years ago still perfect.
     
  5. Sep 6, 2019
    PeteL

    PeteL Member Sponsor 2019 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    6,334
    A lot of questions....

    As to "cheap" glass... I went that way (cheap ebay part) with my YJ last year.

    a) It was a very difficult install because the glass was "tight" in the opening.
    b) It has started to 'fog' in one spot near the bottom edge.
    c) I can't tell you if these things had anything to do with the purchase price.
    d) Next time I will pay to have it installed, that way at least I'll have someone else to blame.
     
  6. Sep 6, 2019
    jjdebarros

    jjdebarros Sponsor Sponsor

    Spokane, WA
    Joined:
    Dec 26, 2017
    Messages:
    56
    I went with a custom auto glass shop here in Spokane WA.
    I took them the replacement weatherstrip that I bought from Walcks, the old glass and my newly painted frame.
    They installed new glass (green tint) for $120.
     
  7. Sep 6, 2019
    mike starck

    mike starck Member Sponsor 2019 Sponsor

    salem,oregon
    Joined:
    Jun 22, 2006
    Messages:
    630
    like wise here. Had a new glass installed by a local glass shop (State Auto Glass).Just in case someone local needs there service. The new glass was a very tight fit but they got it done. They said not to bother with seal next time as they have it in bulk. This was on the 1969. Under $150. Going to do the w/s on the Renegade this winter.Clean and paint frame (black) replace rubber seals and new glass.mike
     
  8. Sep 6, 2019
    sterlclan

    sterlclan Member Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    2,953
    local glass guy cuts all my flat glass sometimes he has used glass from storefronts or some other source that are really cheap.
     
  9. Sep 10, 2019
    74CJ5 Renegade

    74CJ5 Renegade Member

    Houston, TX
    Joined:
    Dec 1, 2002
    Messages:
    276
    I found a local glass installer who will do the installation for $125. I'm thinking I go with the more expensive glass and just get it installed.
     
    Focker and mike starck like this.
  10. Sep 12, 2019 at 8:53 AM
    Norcal69

    Norcal69 Resident Taco Maker 2019 Sponsor

    Cottonwood, Ca
    Joined:
    Sep 6, 2014
    Messages:
    1,090
    When I broke my glass..... :censored:..... I took the the cracked glass to my local glass shop for a template. They cut me a piece of green tint safety glass.... looked just like the old one :shrug:. I think it was $50
     
    Hellion likes this.
  11. Sep 12, 2019 at 11:47 PM
    74CJ5 Renegade

    74CJ5 Renegade Member

    Houston, TX
    Joined:
    Dec 1, 2002
    Messages:
    276
  12. Sep 13, 2019 at 9:20 AM
    Norcal69

    Norcal69 Resident Taco Maker 2019 Sponsor

    Cottonwood, Ca
    Joined:
    Sep 6, 2014
    Messages:
    1,090
    If you are using the lock strip type rubber you will definitely want to get the little tool for installing the lock strip. I fought mine for a couple hours, Steve's71 came over with a beer..... saw what I was doing and said he'd be right back. He returned with his tool and had the lock strip installed before I could find where he sat that beer down.....
     
    Focker likes this.
  13. Sep 15, 2019 at 1:37 PM
    sterlclan

    sterlclan Member Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    2,953
    it can be done with a flat screwdriver too....but I own the tool (square nose chevy days)
     

Share This Page

New Posts