1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Hood To Windshield Rests

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Apr 10, 2023.

Page 2 of 2
  1. scott milliner

    scott milliner Master Fabricator

    Notches. We Don't Need No Stinking Notches.

    I made my own with half inch plate. I also used rubber tube instead if the Welting.
     
    scott milliner, Apr 14, 2023
    #21
    vtxtasy likes this.
  2. vtxtasy

    vtxtasy oldbee 2024 Sponsor 2023 Sponsor

    "half inch plate" Doubles as a tow point. :)
     
    vtxtasy, Apr 14, 2023
    #22
    45es likes this.
  3. scott milliner

    scott milliner Master Fabricator

    [​IMG]
     
    scott milliner, Apr 15, 2023
    #23
  4. TonyM

    TonyM Member 2023 Sponsor 2022 Sponsor

    FWIW the notches on my unmolested ‘56 CJ5 both face down with vacuum wiper for driver, manual wiper on passenger side
     
    TonyM, Apr 15, 2023
    #24
    Fireball, vtxtasy and PeteL like this.
  5. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I approve.
     
    PeteL, Apr 15, 2023
    #25
    vtxtasy likes this.
  6. vtxtasy

    vtxtasy oldbee 2024 Sponsor 2023 Sponsor

    Whatever works. If it makes it easier to put the top or bikini top on, then that is for me. It also appears that the factory didn't have a standard
    way of installing them. Like said before, unless you knew to look, you would not even know.
     
    vtxtasy, Apr 15, 2023
    #26
  7. Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Agreed. Even though I now know mine are upside down, I'm leaving them that way because its' soooo much easer to put the top on.
     
    Fireball, Apr 15, 2023
    #27
    vtxtasy likes this.
Page 2 of 2