Yes, Its specificlly made for doing valve jobs with the head still on, it's from Cal'van tools. We also pressurized the inside of the head to...
Try wedging the wheels against a curb and attempt to force the steering while someone watches to see what moves and what doesn't?
This weekend me and my dad tore down the engine to replace the valve stem seals on the '62 cj. We are trying to find the cause of all the oil...
I run a BFG 33/10.50/15 M/T on 7" wide wheels on my YJ. I made this decision for a couple reasons. Wheel bearings and ball joints don't last as...
I'm confused....are you saying that you have power at the post on the sending unit? If you do something is wired wrong. You should not have power...
We double plated with 1/8" 6"x6" plates and we'll be connecting the lower plates to the frame with 1 1/4" dom tubing. The condition of the fenders...
Well we went for it anyways and it turned out great! [IMG]
I know it's short notice but I hope someone can help us before we commit to roll bar placement this afternoon. We will be bending and installing a...
I recently repaired one in a 3b. The countershaft was dumping fluid from between the case and the bellhousing.Cleaned the front of the tranny and...
Naaah, no leaks, but driving it tonight with cars behind me(headlights) I realized the smoke clouds are a little thicker than I thought. I just...
Has anyone experienced excessive oil consumption with almost no smoke? About a quart of oil every 65 miles! It is the F-head engine. Checked for...
Separate names with a comma.