V6 rear main seal

I have done a search
It's time to replace my rear seal on a 225 it's getting worse

anybody have a QUALITY part# for a V6
I DO NOT want to pull the motor ,I plan on just loosening the crank and slip the new rubber seal in ,,,,is/could it be that easy ?

 

i had the rope seal first when i rebuilt mine. it didn't go so well and leaked and when i was stuck in a DEEP water hole it filled up with water and mud. then after that i think it was napa that had the newer seal but it too is to be desired. but try napa.

 

fel pro two piece rubber......FPG BS40613

 

Here is another: http://www.taperformance.com/proddetail.asp?prod=TA_V1515

 

RockAuto shows the FelPro number - delete the FPG.

BS40613 rear main seal set $7.18 http://www.rockauto.com/catalog/moreinfo.php?pk=122760

 

hahahaaha "The use of neoprene seals will also free horsepower because the drag on the crank is only a fraction of that compared to rope seals."

SERIOUSLY??!!!! race jeep here I come !!!!!

 

I definately would opt for the neoprene rear main seal as opposed to the rope type.

I am using the Clevite brand neoprene rear main seal manufactured by Mc Cord.
Same one as TA performance.

 

got a # for that one Oldtime?

 

Yeah I got a bunch of rear main seal numbers.
I'll upload them later tonight

 

Jeep # 1387134 = cap to block seals
Jeep # 1193965 = front crankshaft packing
Jeep # 1343472 = rear crankshaft packing

Rear main seal part numbers from various manufactures.......
RS 025 = Clevite made by McCord
BS 40613 = Felpro
JV 742R = Victor
BS 322 = McCord

 

perfect thanks OT