1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Yet Another Turn Signal Quest…

Discussion in 'Early CJ5 and CJ6 Tech' started by Peter60cj, Sep 9, 2021.

  1. Peter60cj

    Peter60cj New Member

    Hello, I am doing a lot of wiring on my 60 CJ5. My original Spartan turn signal was a mess so I started (maybe 10 years ago) to put in a new after market from Kaiser Willys. Anyway, got things pretty much working except the pilot light in the switch. The instructions say to sand off some paint on the steering column to secure the ground but if the housing is plastic like these new ones…how is that supposed to ground the plastic housing to the steering column via the hose clamp? I tested it by placing a wire from the metal handle to the column and it works. What am I missing from the instructions or is it implied that you need to run a little wire from inside the plastic housing to the column? Does this make sense?Thank you for the help! Peter
     
  2. Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    Could you run a wire from the turn signal base to the dash and ground it that way?
     
  3. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Won't the clamp provide a ground direct to the column? Perhaps you are reading into the instructions the addition of a wire. Metal to metal contact between the clamp and the column would be enough, as long as there is no paint between to block contact.
     
  4. Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Even with the Spartan, I ran an extra wire down to the dash for a ground. The pilot light works great.
     
  5. Peter60cj

    Peter60cj New Member

    thanks for the replies! I’m going to make a little jumper and ground the pilot bulb to the hose clamp. As to why the clamp isn’t grounding…on the old Spartans and even the new chrome one you can buy, the outer case is metal. On the common one sold now that outer housing of the turn signal is plastic thus no metal comes in contact with the clamp.
     
  6. Peter60cj

    Peter60cj New Member

    You inspired me to find my old Spartan and since I never throw anything away…I did. I think I want to do a refurbishment on it and put it back in. I think they look better! Looking for a video on how to do that project!
     
  7. Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I don't have a video but I do have some info in this post on my build thread: Old Red Maintenance Thread
     
  8. 45es

    45es Active Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Fireball likes this.
  9. Peter60cj

    Peter60cj New Member

    45es, that was exactly what I was looking for! Love the old Spartan compared to the new one! Hope I can make mine work again! Appreciate the help! P