1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Toyota Starter on F134...fact!

Discussion in 'Early CJ5 and CJ6 Tech' started by lynndiwagon, Jul 12, 2008.

Page 7 of 7
  1. matt johnson

    matt johnson Caretaker of family Jeeps

    Ok . I'm confused. Can some one please post a
    Part # as source for immediate availability.
    Will Duralast 16224S work?
    Thanks
     
    Last edited: Jul 13, 2021
    matt johnson, Jul 13, 2021
    #121
  2. 45es

    45es Active Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Matt, Daryl did that in the previous post #120.
     
    45es, Jul 13, 2021
    #122
  3. matt johnson

    matt johnson Caretaker of family Jeeps

    Yes he did. I just wanted to confirm. Many thaks!. Uyou.guys always come through, and it's much appreciated! On it's way. Thanks again folks!
     
    matt johnson, Jul 14, 2021
    #123
  4. Puddle Jumper

    Puddle Jumper Rattle Can Master Painter

    Don't need one right now but I am going to order one just to have it on hand. :bananatool:
     
    Puddle Jumper, Jul 14, 2021
    #124
  5. matt johnson

    matt johnson Caretaker of family Jeeps

    Amazon, dirt cheap, and I keep the core.
     
    matt johnson, Jul 14, 2021
    #125
  6. andy howell

    andy howell Member

    Hey a quick question about flywheels & ring gears.
    Are ring gears interchangeable between flywheels or are they flywheel specific?
    What yrs were the different flywheel / ring gear combos available?
    Any yr overlaps?
    I keep all this info in my Jeep folders & I don't recall this subject discussed in relation to the Toyo starter mod.
    Thanks!
     
    andy howell, Feb 14, 2022
    #126
  7. garage gnome

    garage gnome ECJ5 welder

    MB, GPW, CJ2A and very early CJ3A's had smaller ring gears. These are easily identified by the bell housing which has the starter bushing built in. From 1950 and up, the starters were self supported and the ring gear size was increased. The toyota starter only works with the 1950 and up flywheels. See my post in my build thread about the hard way of figuring this out. Ted is a 1949 3A, so he had a lot of leftover 2A parts, one being the small flywheel and older starter. Also, in the CJ5 era, the change was made from a 8.5" clutch to a 9.25" clutch, ring gear stayed the same.

    http://www.earlycj5.com/xf_cj5/index.php?threads/107180/page-6
     
    garage gnome, Feb 15, 2022
    #127
    tripilio likes this.
  8. CHUGALUG

    CHUGALUG Member

    The 9.25" clutch was ONLY an option in the 60's The Toyota Starter works with the 129 tooth ring gear and the Later 3A bell housing (the one with 3) 5/16" bolt holes on either side (used with the M-38 Waterproof Clutch) I have a 9.25" clutch added to my Late (dual hole drilled flywheel that will take either clutch) 129 tooth ring gear and Late Bellhousing. It works perfectly. I only had to ream out the top mounting bolt to about 7/16 for it to fit.
     
    CHUGALUG, Feb 15, 2022
    #128
  9. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    I think it actually came along a bit earlier than that, I had one on a '59 CJ6.

    Had some kind of a strange hieroglyphic type marking on the flywheel that I've never been able to decipher. :confused:

    Flywheel WTF_2..JPG

    Flywheel WTF_1jpg.JPG
     
    Howard Eisenhauer, Feb 15, 2022
    #129
  10. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Howard Hughes? :coffee: <jk>

    Maybe it came from that dealership in Riverside?
     
    timgr, Feb 15, 2022
    #130
  11. kenb

    kenb Cleverly disguised as a responsible adult

    When was IH making Willys engine parts? I'm confused
     
    kenb, Feb 15, 2022
    #131
  12. amboynut

    amboynut Member

    IH-logo-768x922.png
     
    amboynut, Feb 15, 2022
    #132
Page 7 of 7