1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Replacing the generator

Discussion in 'Flat Fender Tech' started by Gwillys, Feb 12, 2006.

  1. Gwillys

    Gwillys 1953 CJ3B

    I want to replace the generator on my cj3 with a new atlernator. The car is already wired for a one wire alternator and is converted to 12 volts. I think can go to an auto parts store and get an alternator that will bolt-up in the original brackets. I don't know what to do about a new pully however. Will I be able to order or buy a pully from the store?
     
    Gwillys, Feb 12, 2006
    #1
  2. dohc281

    dohc281 It is what it is.

    There are a couple places where alternator kits can be bought. I bought one from Willys Works and it included a pully.
     
    dohc281, Feb 12, 2006
    #2
  3. mustanghd

    mustanghd New Member

    When I switched mine over to Alt. I just removed the pully off of the Gen. and put it on the Alt. You will need to put a spacer between the Alt housing and the pully to keep it from rubbing:)
     
    mustanghd, Feb 12, 2006
    #3