1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Point gap???

Discussion in 'Early CJ5 and CJ6 Tech' started by Sledgehammer, Jul 8, 2006.

  1. Sledgehammer

    Sledgehammer Sure, I'll try it

    Does anyone have the proper gap for the points on a 225? I am having troubles. Thanks
     
    Sledgehammer, Jul 8, 2006
    #1
  2. Mcruff

    Mcruff Earlycj5 Machinist

    If I remember right the Prestolite distributor should be .022", not sure about the Delco, but if you have a dwell meter, set it by the dwell its much more accurate.
     
    Mcruff, Jul 8, 2006
    #2
  3. Patrick

    Patrick Super Moderator Staff Member

    Delco calls for 29 or 30*
     
    Patrick, Jul 8, 2006
    #3
  4. Sledgehammer

    Sledgehammer Sure, I'll try it

    Thanks gentlemen. I've got it back to running smooth now. I had to order new points and rotor. The rest of it I found between the 4 different parts stores in two towns.
     
    Sledgehammer, Jul 8, 2006
    #4
  5. 64_CJ5

    64_CJ5 Build it not Buy It!!

    where did you find the correct points at? I have a prestolite
     
    64_CJ5, Jul 9, 2006
    #5
  6. Sledgehammer

    Sledgehammer Sure, I'll try it

    I bought a set that looked correct but were a mirror image. ie facing right when should have faced left. I ended up ordering them at the local parts store. We'll find out Tues if it is right or not.
     
    Sledgehammer, Jul 9, 2006
    #6
  7. 64_CJ5

    64_CJ5 Build it not Buy It!!

    yep had the exact same problem, I got mine from the zone and it also was a mirror image, so I got some from summit, and it was way to big... I just can not figure out how hard is it to get the right part from a parts store.
     
    64_CJ5, Jul 9, 2006
    #7