...with the engine still in the Jeep? Is there enough clearance to drop the stock pan, and do the work?
Whenever I tank up my 1975, CJ-5, I feel at risk. The gas seems to splash back at me. This is, in part, to the fact that I am using 1976+ tail...
I have no idea how this thing mounts into my Jeep! (Since I have never had a skidplate...) I know the tank gets strapped into the skidplate....
So, I hit a BIG bump, and the front tab broke on the front of my 1975's gas tank... [IMG] This did NOT damage the structural integrity of...
I think I am going to change my name to "Soup Sandwich"... I went fo a drive last night, and hit a pretty significant bump. I heard something...
Now that my Jeep is running correctly, I am seeing other little things I want to work on. It is a pretty stock 75 CJ-5. when I look at her from...
I have an aftermarket chrome valve cover. I know, I know, chrome dont get you home, but it was aquired 10 or so years ago, and the stock cover...
Alright, you guys know I am in the middle of an MC2100 fandango: I rebuilt it correctly, but have been having a few problems. - I figured...
My temp gauge was pessed high. I knocked it to the low peg by reversing the wires. Prior to hooking the gauge back up, I verified the voltage...
My Intermediate began life as 2 different jeeps: 1973 w/ 304 1975 w/ 258 It is more 1975 than 1973. I used the 258 and the trans/xfer case...
I've had alot of requests for better pics of my homebuilt seat brackets. Here are a few. Under the drivers side seat... [IMG] You can see...
I TIVOed it, and have watched it over and over, but can't figure this point out. It involves adding a Howell TBI setup to a 258. They added...
Just a bit of curiousity on my part. Whatever is SUPPOSED to go there might be in boxes in my attic... [IMG]
Some stupid spoof link site popped up in it's place! I was getting ready to get the 2 bbl conversion place so I can plop a weber carb or an mc...
I am finally at a point in my life where both the wife and I have CAREERS. It is a good feeling. My Jeep is "close" to done (Carb issues still...
My Jeep is a 75 CJ-5 with a 258, T-14/D20. Another parts Jeep that was used was a 1972 with a 304. I kept the tranny/xfer case. What...
I am such a noob. First near catastrophe: last summer,driving my 5 and the drivers side rear wheel nearly fell off at 40 MPH. The lug nuts came...
Mine are still connected, but are not "tied" to anything to hold them up in the air. They do have the little check-valve thingies on the ends....
This post was on JU about a week ago. I meant to mention it earlier, but forgot. What things would you guys like to see fabbed for 72-75 CJs?...
Are they similar to the 76+ ones? Were they an option, or some dealer/aftermarket thing?
Separate names with a comma.