My jeep was working perfectly. About two months ago, ventured about 40 miles from the house (furthest I've ever dared), driving on jeep trails...
Hey guys, I would like to remove and replace my headers with exact replacements. I have new headers and gaskets, what is the "be sure to" list...
Headers. HELP! I have a 67 that came with the 225. It is mostly original, including the Ross steering (Eric at Novak said that the Sanderson...
Dauntless 1967 CJ5 I currently have headers and two exhaust pipes that exit at the rear of the jeep. There are holes in the exhaust where the...
I thought I had a 12V electrical system, but now I'm confused. 1967 Dauntless CJ5 Owners manual says it could 6V or 12V. I hooked up the...
Anyone have a photo or link to the original side mirror on a 67? There is a braket on the bottom of the windshield, but no mirror. I'd like some...
Alright, the D44 is back together, and in tip top shape (for now.) I'd now like to go through the D27. I'd like to replace bearings, seals,...
Well, I've replaced inner seals, bearings, races, and the outer seals. I put it all back together. Torqued the drums to 150 ft/lbs. Now, the...
Hi Guys, I'm trying to remove my left rear axle on an offset D44 (1967). The right one came out with a slide hammer. I can't even get the...
Chiltons says to use an axle puller to pull axle. How bout all you boys that so eloquently described pulling the drum with a drum puller,...
67 CJ5, 225, mostly original. Alright, I've been looking a Krage, and at the jeep. I'm going to replace everything that I should. So here's the...
I'm working on cleaning old dry grease and gum from all my brakes. I have a gasket looking part, that 4-wheel drive and a few others don't have...
Separate names with a comma.