I recently got my Tranny put back together, with the help of M38Willys (THANKS BRANNON!), and turned it over this morning. I replaced everything,...
I am having a helluva time getting the tranny reinstalled in my '71 CJ5. I replaced the clutch/pressure plate/clutch fork and t/o bearing and...
I got it out with the use of a rented puller from Autozone. It snapped right out. I'm kind of bummed I didn't get to try the grease method, it'd...
OK, Got the flywheel off...you're right it IS heavy!! I managed not to crush anything too important (what's a pinky for anyway) and am wondering...
I got the "shaved down bolts" (due to PO installing a clutch disk backwards) out of the flywheel and am taking it to a shop to be resurfaced. I...
Good points!!! Thanks yet again!
Brannon Thanks again! I was thinking about the flywheel bolts and the flip side of the coin is what if the head is a bit weak and won't withstand...
I can't find the torque for those bolts in my Haynes manual...any idea what it would be?
I was thinking about replacing them as well, might as well since I've got it off. Are they special bolts or can I just grab them at Lowes/Home...
Thanks for the advice, after checking out the fork further one of the "ears" is worn off and there is a groove cut almost through the fork where...
I guess a hammer it will be! I hope the new one goes in easily and doesn't require a beating!!
Here are pics of the T/O bearing. What do I do next?? THANKS
I'm holding the clutch fork in my hand (with the bearing still in it) and can't figure out how to get the bearing out of the fork!! What am I...
I am replacing the clutch and T/O bearing on my '71 CJ5. The clutch was making a horrid sound when depressed so I assumed the T/O bearing was...
I thought the whole "you wouldn't have to disconnect the drive shafts" thing sounded wacky! Maybe his motor was removed for some reason???...
The clutch on my '71 CJ5 makes a God awful screeching sound when depressed so I am figuring the T/O bearing needs to be replaced. From what I've...
Thanks for all the help! I drove the Jeep in to work today and it doesn't really wander on it's own as much as I can turn the wheel 1 to 2 inches...
Just torqued the nut on top down this afternoon. It's fully seated and as tight as it's going to get but there's still movement. I can see the...
How much play is "normal" in the steering bellcrank? I just got the Jeep roadworthy and am driving down the road working the steering wheel left...
I'm trying to get the wipers to work so I can pass a vehicle inspection here in NC. There are 3 wires coming out of the motor, green, black and...
Separate names with a comma.