I thought I would explain what I want to do with my rig. I want to be able to drive my rig to many different places just because it is fun to...
I found some more pics. here is how I bought the jeep: [IMG] I re-built the tub from the fire-wall back. Here is one of the pics: [IMG] I...
57 CJ-3b Ameture Built!!! Here is is my 3b. Rockers I just got on. [IMG] I'll post more as I find them on my computer. Right now it has: 3...
Sorry it probably has been said but I am going to run a Holly 2-barrel 390cfm on my 225. I was wondering if the 231 intake from ??? (what year,...
Everything is 225 v6 parts from the input shaft on the tranny to the flywheel. The on thing that I doesn't match up is the shoulder bolts. I...
I put 1 grade 8 washer on each bolt between the pressure plate and the flywheel. I also put a hydraulic master/slave setup of a wrangler. It works...
Thanks for the ideas. I might try to rebuild it when I break it it or something else wheeling it this winter.:cheers:
I have a T90 that wont stay in 2nd gear and grinds going in to 2nd and 3rd. What can I do or does anybody know a good rebuild guy near Holland, MI
3rd on the +/- .5 Mine in my 3b the engine/tranny/t-case are not square and I beat the crap out of it and it has held together just fine (knock on...
I have a '57 3b that I did a frame up rebuild, not restoration on, that I power washed the frame with a sand feed on the nozzle and use rustolem...
Re: #1 cylider on a 225?? thanks. I was 90% sure but wanted to be 100%. thanks again!
Maybe a dumb question but the book I have says the #1 cylinder is the front left. Is that from the driver seat or from standing in front of the...
it's works now. I drove it today.
I added a washer to each bolt and that worked. It made it the right clamping pressure but not so it dis-engaged the pressure plate all the way.
the disc is not in backwards. I just pulled that tranny on sat to check that. Do you have anyothedr ideas to try??? The pedals are the dash and...
the pedal does move hard. I put a hydralic master/slave out of a 94 wrangler in it to push the fork and I can only move the fork about or less...
I have a 225 and when I blot the pressure plate and disc on the clutch compreses to far so I can't disengage the the clutch. Is there suposed to...
Separate names with a comma.