I had the carb off my 69 CJ5 with stock 225 today. Has the original 2 barrel carb (I assume). What is a base setting for the air/fuel mixture...
I'm updating an old CJ5 (69) and recently added swinging pedals to it from a Subaru WRX. My question is: on the pedal setup the brake light...
69 CJ5 with original 225 and stock parts: Lately this beast has been an inconsistent starter. Was starting fine all fall, occasionally would...
What is the oil capacity of the trans and transfer case on a 69 CJ5?
I just received a package of seals for my transfer case (69 CJ5, bone stock) that I plan to install in the next couple of days. Was experiencing...
No great spot to post this but here it goes anyway: I have a 69 CJ5 with a 76+ windshield frame. Bought a used Dualmatic Bestop (older top,...
Let me preface this by saying, I've printed and reviewed the wiring diagram for the 1970 CJ found elsewhere on the forum. Still doesn't make...
Thanks to everyone for their input on my problem with the clutch fork. Nickmil was the man, ordered a third fork, did a little filing on the ears...
I've been down this path too long.... Here's the scenario: 69 CJ5, stock Buick V6, 3 speed trans. One of the ears broke off the clutch...
Long story short--had to replace a clutch actuating fork due to a broken ear. Upon replacement and reinastallation the clutch does not work....
On my 69 CJ5 I found a broken brake line. It is a small line running to the rear. It broke ahead of a junction with an electrical connector on...
Pulled trans today because of long standing battle with inoperative clutch. Find that the one of the "ears" that hold the clutch fork to the...
Have had a problem getting my clutch to engage/disengage. At this point I believe the fulcrum has become disconnected from the throwout bearing....
Has anybody fabricated a clutch fork extension when installing a push type slave cylinder? Looks to me like you should be able to bolt on an...
A little background: replaced the tub on my 69 CJ5, has 225 and stock 3 speed manual trans. New tub had a hanging brake pedal, removed existing...
Picked up a replacement tub for my 69. The guy I got it from didn't know much about it. However, it has a simulated battery box(?) on the right...
I am going to move my battery to the bed of my Jeep. What size wire will I need to do so, #2 or can I use #4?
Swapping bodies on my CJ5 is getting perilously close to getting the details wrapped up. However, a couple of questions came up tonight. 1) On...
My latest problem. I am using a steering box and power steering pump (hopefully) from a mid/early 70's Chevelle. All is well other than the pump...
Anybody do the Saginaw swap without needing a spud shaft? I saw on an FJ forum a guy that had moved the box far enough forward into the cross...
Separate names with a comma.