1972 CJ5 E brake pictures

Does anybody have any pictures of the ebrake assemble looking from under the jeep,
Cables etc from the foot release back to the wheel.:?
Thanks
Terry

 

This may get you started. I don't have photos of the forward section. But I have a couple of the rear where the cable splits and feeds off to the drum.

 

It looks like the cables con into the backing plate from the back. Can you get a picture looking at the wheel (backing plate)?

 

I too am currently working on the parking brakes of a 73 CJ 5. I got the front cable loose and got it to slide. I reinstalled and tightened at the splitter to attempt to engage the brakes. No go on that plan, so I will be getting into the drums next. I dont think the parking brake has been used in years on this Jeep. Everything else I have touched has been caked with sand and rust. So far disassembly cleaning and re-assembly have restored operations. I have a Chiltons and a Bentleys manual with photos. I have searched for a TSM that usually has even better illustrations and procedures but have not found it yet.If/ When I do I will post a link. I found a link on this great site, maybe it will help
http://trailforge.com/TSM/Section_09.pdf

 

I am looking for pictures of the two cables coming together then one cable (Adjuster?)to the front, not sure what that is called.
Thanks

 

While the following is from an intermediate Jeep, it's a '75. All caveats apply. Here you go, starting from just behind the transfer case where the single cable passes through a support and working backwards towards the "tee"...

 

These are exactly what i was looking for, thanks for looking for all the pictures guys.
Regards
Terry