1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

High Steer installed

Discussion in 'Builds and Fabricators Forum' started by 4x4chevette, Apr 25, 2005.

  1. 4x4chevette

    4x4chevette Member

    Since MY screw up I could only use one of the arms, and I ahve to keep the tie rod below the springs. other than that Myers Machine Shop did a WONDERFUL job... but heres where the new darglink sits...

    Aint she so parrallel to the ground?
    [​IMG]

    [​IMG]

    [​IMG]

    The new Tom Woods Driveshaft
    [​IMG]
     
    4x4chevette, Apr 25, 2005
    #1
  2. neptco19

    neptco19 That guy....

    Very Nice 8)
     
    neptco19, Apr 25, 2005
    #2
  3. Hawk62cj5

    Hawk62cj5 Captain of OldSchool

    Nice that baby is heavy duty.
     
    Hawk62cj5, Apr 25, 2005
    #3
  4. jd7

    jd7 Sponsor

    very nice
     
    jd7, Apr 25, 2005
    #4
  5. XJ_Ranger

    XJ_Ranger Tide rocks my socks off

    what closed knuckle axle is that?
     
    XJ_Ranger, May 5, 2005
    #5
  6. willysnut

    willysnut Banned

    What size bolts hold the arm on? Seems like a lot of extra leverage (sheer load) on the bolts. Awesome machine work.
     
    willysnut, May 6, 2005
    #6
  7. 4x4chevette

    4x4chevette Member

    Thats a D30 from a 72 Wagoneer... same knuckles as the d27

    Those are 3/8's grade 8 bolts.... with tappered sleeves.. gonna see if it pulls the threads.. sicne its street only... if ti does, ill stud it....

    its also running 1ton chevy rod ends.
     
    4x4chevette, May 6, 2005
    #7