1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Turn Signal Woes

Discussion in 'Early CJ5 and CJ6 Tech' started by 64cjbob, Oct 30, 2021.

  1. 64cjbob

    64cjbob Member

    I have a 64cj5 i totally rebuilt it from the ground up. Put a new wiring harness in and a new turn signal switch that mounts on the steering columun it flashes and signals work but the bulb wont flash. Testing it the plastic housing it shows its puting out 12 volts if i run a ground wire to the side of the bulb housing it flashes. Got it taken care of
     
    Last edited: Dec 18, 2021
    64cjbob, Oct 30, 2021
    #1
  2. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Some signal housing need to be clamped to the metal steering column for ground. I prefer to connect a ground wire under the bulb mounting bracket screw and fake the wire along the other wires and ground it to the dash.
     
    Walt Couch, Oct 30, 2021
    #2
    Twin2, Rick Whitson and Fireball like this.
  3. 64cjbob

    64cjbob Member

    Thanks i soldered a wire to the side of the bulb scocket and had to insulate it so it would not touch anything
     
    64cjbob, Oct 31, 2021
    #3
    Ol Fogie likes this.
  4. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    That should work just fine. (y)
     
    Walt Couch, Oct 31, 2021
    #4