1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Steering box

Discussion in 'Early CJ5 and CJ6 Tech' started by kiowamtp, May 15, 2005.

  1. May 15, 2005
    kiowamtp

    kiowamtp Member

    DFW
    Joined:
    Dec 24, 2004
    Messages:
    618
    Would this happen to be a Saginaw box or is it for another application? It is hard to match up from some of the pics I have found in my searches.

    Thanks
     
    kiowamtp, May 15, 2005
    #1
  2. May 15, 2005
    mb82

    mb82 I feel great!

    Charlottesville Va
    Joined:
    Mar 17, 2003
    Messages:
    2,706
    yep. that looks to me to be a CJ mount also.
     
    mb82, May 15, 2005
    #2
  3. May 15, 2005
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    Looks like the one I had on my 82' CJ8.
     
    scott milliner, May 15, 2005
    #3
  4. May 15, 2005
    zed

    zed Iowa- Gateway to Nebraska

    central iowa
    Joined:
    Aug 4, 2004
    Messages:
    745
    yep same one i just installed. looks like the one out the 75 i used. the cj mount looks like one of the later pressed steel mounts.
    as was recommended to me when i was looking, count the input turns lock to lock. about 4 turns is ok. 3 turns is pretty quick for a short wheel base cj. if it's from a waggoneer then it might come out to 3 1/2 turns and might be a variable ratio.

    the 76 stamp on it is an indication of the correct sag. but doesn't tell you the ratio.
     
    zed, May 15, 2005
    #4
New Posts