For Sale V6 Engine+t90+extras

$1000

For sale is a V6 engine, 3spd transmission, and other parts that came out of a running and driving 59cj5. The jeep is being put back to a 4cyl and these are the parts that are no longer needed.

Engine: I believe it’s a 225. That is based on the shape of the valve covers and the fact it’s an odd fire. Unknown mileage but it ran strong.

Transmission: just a run of the mill t90. No issues with it. Still bolted to the engine.

Engine mounts and crossmember: the mounts are a little rough on the edges where that were torched from the frame. A little grinding and I think they’ll clean up fine. The crossmember is unique to the v6 setup, I think, because it didn’t work with the 4cyl that got put back in. The transmission was too far to the right with this one.

Radiator and shroud: Modime radiator in excellent condition with a plastic shroud. Appears to be factory.

Drive shafts: Both front and rear. One was a little too long, the other a little to short for the new setup.

Cable clutch setup: The cable of course and two brackets. One bolts to transfer case the other either bolts or welds to frame.

Draglink: Shorter than the 4cyl one. I think so you can Re-clock the pitman arm to get full travel both ways without hitting something.

Throttle pedal and bracket: The bracket bolts to upper floor cover. The pedal is homemade and welded on. Not great looking but it worked.

Firewall mounted battery tray.

Exhaust system: Fully welded together. Be advised it does go under the transmission crossmember because this jeep has a pto winch.

This is located in Cincinnati Ohio. Shipping is not a viable option. I do have an engine hoist so I can load for you.

Thanks for looking.

 

Hmm
I think we can work something out.

 

I see the bellhousing I need. You are close enough to come get it. Let me know if you end up breaking this up.