1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Not Sure If This Is A Good Deal Or Not...

Discussion in 'eBay, FB Marketplace and Craigslist' started by Scubabugdiver, Oct 19, 2023.

  1. Scubabugdiver

    Scubabugdiver Member

    Scubabugdiver, Oct 19, 2023
    #1
  2. ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Anything will bolt to anything with enough time, money and talent, but the short answer is no.
     
    ITLKSEZ, Oct 19, 2023
    #2
    Scubabugdiver likes this.
  3. Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    You can modify a stock GM bellhousing to bolt to it without a ton of effort. I think advance adapters sells a bolt-in bellhousing solution. You will need an adapter for the back of this one too. The Jeep ones came with a D300 adapter but this is lacking the housing. Not sure about the output shaft. This one does look like it's for a 4x4 application but it's odd the adapter housing isn't included.
     
    Fireball, Oct 20, 2023
    #3
    Scubabugdiver and dnb71R2 like this.
  4. dnb71R2

    dnb71R2 SuperDave 2023 Sponsor

    The AA bell housing will work, BUT you might as well get the heavy duty T-18 4 speed with granny low instead of that medium duty T-176 with close ratio first. And, like Fireball said, you still need the transfer case adapter.
    For that price, you really should consider options.
    Remember there's a wealth of info here... Novak Conversions :: Manual (novak-adapt.com)
     
    dnb71R2, Oct 20, 2023
    #4
    Scubabugdiver and vtxtasy like this.