1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

parts

Discussion in 'Early CJ5 and CJ6 Tech' started by Boywilly, Jul 1, 2005.

  1. Jul 1, 2005
    Boywilly

    Boywilly New Member

    Windsor,Ontario,C...
    Joined:
    Jun 27, 2005
    Messages:
    24
    i was wondering where you guys thinki should buy new body parts(tub kit) I know about 4WD as i got the one for my 7 there !! Is Fiberglass a good choice or would steel be better????All ideas will be appreciated !!!

    Thanks
     
    Boywilly, Jul 1, 2005
    #1
  2. Jul 1, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    Whats wrong with the one you have?
     
    blevisay, Jul 1, 2005
    #2
  3. Jul 1, 2005
    Boywilly

    Boywilly New Member

    Windsor,Ontario,C...
    Joined:
    Jun 27, 2005
    Messages:
    24
    the floor and the rear wheel wells are like swiss cheese and the outside has tons of surface rust and i saw at least one support rib rotted off!!!I'm not going to patch something and have to do it every year if i don't have too!!
     
    Boywilly, Jul 1, 2005
    #3
  4. Jul 1, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    blevisay, Jul 1, 2005
    #4
  5. Jul 1, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    blevisay, Jul 1, 2005
    #5
  6. Jul 2, 2005
    Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    North Central FL
    Joined:
    Jun 15, 2003
    Messages:
    2,159
    I have the 4wd hardware glass body with it.. been there for 10 years.. it's dun gud...


    BUBBA
     
    Jeepenstein, Jul 2, 2005
    #6
  7. Jul 2, 2005
    Chuck

    Chuck Sponsor

    Southshore Ma
    Joined:
    Sep 19, 2004
    Messages:
    1,463
    I would go with steel also. I’ve seen Rigidsteel’s tubs before and they seem like good quality products. Plus there only 2 hours away so I can pickup and save on shipping.
     
    Chuck, Jul 2, 2005
    #7
  8. Jul 4, 2005
    Hansh

    Hansh Going Mobile

    SE Wisconsin
    Joined:
    Dec 7, 2004
    Messages:
    425
    I have an AJs fiberglass, it is built well, I would recommend them. If I had the money at the time I would have gone with Steel, or more money, Stainless or Al. There are advantages and disadvantages to both.
     
    Hansh, Jul 4, 2005
    #8
New Posts