1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

heater firewall factory holes

Discussion in 'Early CJ5 and CJ6 Tech' started by willysnut, Aug 12, 2005.

  1. Aug 12, 2005
    willysnut

    willysnut Banned

    Newnan, Ga.
    Joined:
    Oct 8, 2003
    Messages:
    654
    Up till now my cj didn't have a heater, so now I have a factory unit from an ECJ. Anybody have any pics and dimensions of the factory holes so I can cut the virgin firewall? dimensions from the top or the side. email pics to me at willysnut@numail.org
     
    willysnut, Aug 12, 2005
    #1
  2. Aug 12, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    You don't just have a plate covering it? My '62 didn't have a heater, there was a plate bolted over the hole.
     
    sparky, Aug 12, 2005
    #2
  3. Aug 12, 2005
    Old Bill

    Old Bill Aggressively passive....

    Really Southern...
    Joined:
    Nov 12, 2004
    Messages:
    822
    Don't have the dimensions, and I'm afraid that I don't have a square on
    shot. I can try to get the dimensions of the mounting screws, but may be hampered by how they are placed. This is assuming that you are asking about the driver's side heater. Mine's a '57....


    [​IMG]
    [​IMG]
    [​IMG]
     
    Old Bill, Aug 12, 2005
    #3
  4. Aug 12, 2005
    willysnut

    willysnut Banned

    Newnan, Ga.
    Joined:
    Oct 8, 2003
    Messages:
    654
    Yes it is a driver's side heater. What's the measurement from the grill support angle and from the lip of the hood I just don't want to have any clearance problems with the column.
     
    willysnut, Aug 12, 2005
    #4
  5. Aug 12, 2005
    Old Bill

    Old Bill Aggressively passive....

    Really Southern...
    Joined:
    Nov 12, 2004
    Messages:
    822
    I'll try to get to it tonite....bear with me.
     
    Old Bill, Aug 12, 2005
    #5
  6. Aug 12, 2005
    Steamer

    Steamer Thick and gritty!

    SW OR
    Joined:
    Oct 17, 2004
    Messages:
    389
    Jeff, pm me your postal, I'll send ya a template of these holes from my '61. Top one is rectangular, bottom is, well, odd shaped.
     
    Steamer, Aug 12, 2005
    #6
  7. Aug 13, 2005
    willysnut

    willysnut Banned

    Newnan, Ga.
    Joined:
    Oct 8, 2003
    Messages:
    654
    PM'ed ya
     
    willysnut, Aug 13, 2005
    #7
New Posts