1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

"Rubber" Part Source

Discussion in 'Intermediate CJ-5/6/7/8' started by The Wizard, Sep 19, 2005.

  1. Sep 19, 2005
    The Wizard

    The Wizard Member

    Colorado...
    Joined:
    Jul 12, 2005
    Messages:
    179
    Looking for a source for the gasket that is mounted to the bottom of the windshield and the gromet that mounts in the rear panel and the fuel filler hose end passes through. What do they call that metal piece that mounts to the rear panel?
     
  2. Sep 19, 2005
    Chuck

    Chuck Sponsor

    Southshore Ma
    Joined:
    Sep 19, 2004
    Messages:
    1,463
    Shouldn’t you know this Mr. Wizard? (j/k) ;) You can find what you’re looking for here http://www.4wd.com/.

    Are you referring to the metal filler neck that attaches to the filler cap protector?
     
  3. Sep 19, 2005
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
    R)
     
  4. Sep 20, 2005
    The Wizard

    The Wizard Member

    Colorado...
    Joined:
    Jul 12, 2005
    Messages:
    179
    The Wizard knows there are two types of knowledge. There is the type where you know something (I know the Quadratic Formula and how to use it) and then there is the knowledge of how to find out that which you do not know. So, the Wizard does know.

    By the way its is the filler neck grommet that I am also looking for.
     
  5. Sep 20, 2005
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
  6. Sep 20, 2005
    The Wizard

    The Wizard Member

    Colorado...
    Joined:
    Jul 12, 2005
    Messages:
    179
    Thanks for the information. I have the parts on order.
     
New Posts