1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

SOA drag link help

Discussion in 'Early CJ5 and CJ6 Tech' started by danjor90, Dec 29, 2005.

  1. Dec 29, 2005
    danjor90

    danjor90 New Member

    San Diego, Ca
    Joined:
    Jun 1, 2005
    Messages:
    6
    ive just done a soa swap using wrangler springs and now im going to tackle the steering. i have a saggy 4 bolt ps box, an AA mount and still have the stock d27. my question is what to do about the drag link from the pitman arm to the tie rod. should i just bend some heavy wall tubing in an "s" shape or use a heim joint setup. is there a histeer conversion or is it even worth the effort on the d27?:? any help would be greatly appreciated.
     
    danjor90, Dec 29, 2005
    #1
  2. Dec 29, 2005
    Ghetto Fab.

    Ghetto Fab. Member

    Atascadero, Ca.
    Joined:
    Jan 13, 2005
    Messages:
    512
    Hows about trying a drop pitman arm? Depending how you mount the steering box you might be able to get it close. I'd recomend not bending the drag link. If you had a D30 I believe you could just bolt flat top D44 knuckles on it and run some common high steer arms.

    Hope that helps.

    Kevo
     
    Ghetto Fab., Dec 29, 2005
    #2
New Posts