1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Torque question for 76 d30

Discussion in 'Intermediate CJ-5/6/7/8' started by eddyt, Jan 27, 2006.

  1. Jan 27, 2006
    eddyt

    eddyt Member

    chesapeake VA
    Joined:
    Oct 29, 2005
    Messages:
    178
    Does any one know the torque settings for the spindle nuts on a 76 d30. It has probley been discussed here before but I could not find it. Thanks
     
    eddyt, Jan 27, 2006
    #1
  2. Jan 27, 2006
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    Tighten them to 50 ft/lbs to seat the bearing, then back it off a full turn or more. Retighten to 50 ft/lbs, then back off 1/6 of a turn.
     
    lynn, Jan 27, 2006
    #2
New Posts