1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 20 T-Case Question

Discussion in 'Intermediate CJ-5/6/7/8' started by greencj5, Aug 26, 2006.

  1. greencj5

    greencj5 Member

    Help! I need to seperate a D20 from the T-15 transmission. How are they connected internally? Do they have a nut like the D18 or do they slip apart after removing the 5 bolts that hold the two cases together? My FSM's are to old to show a D20.

    TIA:beer:
     
    greencj5, Aug 26, 2006
    #1
  2. hudsonhawk

    hudsonhawk Well-Known Member

    Remove the bolts on he case and they just slide apart. The bull gear on the back of the tranny is inside the t-case. It is a tight fit to get it through the opening but it will come apart.
     
    hudsonhawk, Aug 26, 2006
    #2
  3. CJ4U

    CJ4U Aint broke, ur not trying

    Just take the bolts out and it'll come apart. Depending on how they were sealed together (The gasket maker stuff bonds them together) it may take a little pressure, but is not connected by anything inside.
     
    CJ4U, Aug 27, 2006
    #3
  4. greencj5

    greencj5 Member

    It sounds like no suprises await. Thanks for the insight.
     
    greencj5, Aug 27, 2006
    #4