1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need help with Frame tie-in

Discussion in 'Builds and Fabricators Forum' started by Flip, Jan 29, 2007.

  1. Jan 29, 2007
    Flip

    Flip Member

    Ludlow, vermont
    Joined:
    Apr 6, 2003
    Messages:
    58
    I wam working on a cage and wanted to tie it into the frame through a Polyurethane bushing, only the one I wanted to use from Energy Suspensions is not readily available. For those of you that have done this what did you use for bushing? I was hoping to use something to fit in an 1.5" diameter tube.
     
    Flip, Jan 29, 2007
    #1
  2. Jan 29, 2007
    CAP

    CAP Fresh out of the clam.

    S.E. MN
    Joined:
    Aug 2, 2006
    Messages:
    38
    Twisted Customs
    605-923-7288

    Ask for Brian.

    They have all sizes of bushing kits (outer sleeve, poly, inner sleeve, and bolt), lazer cut tabs/gussets, everything you need to build a buggy. Prices are competetive, too.
     
    CAP, Jan 29, 2007
    #2
  3. Jan 30, 2007
    JeepTherapy

    JeepTherapy Sponsor

    Negaunee, Michigan
    Joined:
    Jun 29, 2006
    Messages:
    695
    Is this what you mean? I used spring bushings.

    [​IMG]
     
    JeepTherapy, Jan 30, 2007
    #3
  4. Jan 30, 2007
    Flip

    Flip Member

    Ludlow, vermont
    Joined:
    Apr 6, 2003
    Messages:
    58
    Ya that is what I was thinking of doing. I was looking for a bushing that is about 1.5 diameter to fit inside the tubing I am using. What is the size of the bushing you used?
     
    Flip, Jan 30, 2007
    #4
  5. Jan 30, 2007
    karlvin08

    karlvin08 I R SMRT

    Clarksville, TN
    Joined:
    Aug 30, 2006
    Messages:
    81
    karlvin08, Jan 30, 2007
    #5
  6. Jan 30, 2007
    Flip

    Flip Member

    Ludlow, vermont
    Joined:
    Apr 6, 2003
    Messages:
    58
    Flip, Jan 30, 2007
    #6
New Posts