1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Brake lights on

Discussion in 'Early CJ5 and CJ6 Tech' started by Cooper, Mar 13, 2007.

  1. Mar 13, 2007
    Cooper

    Cooper New Member

    Ludington, MI
    Joined:
    Feb 1, 2003
    Messages:
    27
    Walked into the garage last night to find the brake lights were light on my CJ-5. Reached in and grabbed the clutch pedal by mistake and they went out. The jeep has not been touched by anybody for more than two weeks. The light lenses were very hot so they where on for a while. Anybody ever seen this or have any guesses why this happened? I unhooked the battery for now. FYI, I put in a new wire harness from EZ Wire this winter.
     
  2. Mar 13, 2007
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    Check brake fluid level - I've had it where the fluid leaked out and let the pedal down far enough to turn on the lights.
     
  3. Mar 13, 2007
    jzeber

    jzeber Well-Known Member 2022 Sponsor

    Morgan Hill, Ca
    Joined:
    Nov 15, 2003
    Messages:
    3,327
    I had the same problem. Turned out the brake switch was bad. I have heard they can get hot enough to melt the plastic on the switch.
     
  4. Mar 13, 2007
    Cooper

    Cooper New Member

    Ludington, MI
    Joined:
    Feb 1, 2003
    Messages:
    27
    Thanks for the ideas. I hooked the battery back up at lunch and they didn't come on but they were back on when I got home from work. I'll check the fluid and look over the switch this weekend. I was thinking that maybe it was moisture because the garage is pretty damp right now, but not really sure. Unhooked the battery again just in case.
     
  5. Mar 14, 2007
    Skidooxtreme

    Skidooxtreme Member

    Cheyenne, Wyoming
    Joined:
    Feb 14, 2007
    Messages:
    74
    I had the same problem and replaced the sensor and the problem was still there. I ended up rebuilding the master cylinder and that ended up fixing the brake light issue.

    Matt
     
New Posts