1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Bellcrank

Discussion in 'Early CJ5 and CJ6 Tech' started by ExpressEN1, Mar 22, 2007.

  1. Mar 22, 2007
    ExpressEN1

    ExpressEN1 Member

    Central Arkansas
    Joined:
    Jan 20, 2007
    Messages:
    98
    I'm sure it's in here somewhere and i'm missing it, I don't have a FSM just yet, only the Jeep Owners Bible. What is the torque for a 7/8" bellcrank? I'm not being lazy, i'm still searching.
    Thanks guys, once I get this bellcrank in everything forward of the gear box will be new. I just hope that will cure the steering play. The Saginaw conversion is not in the budget for a long time.:)
     
    ExpressEN1, Mar 22, 2007
    #1
  2. Mar 22, 2007
    ExpressEN1

    ExpressEN1 Member

    Central Arkansas
    Joined:
    Jan 20, 2007
    Messages:
    98
    I found a post from 2005 that says 70-90 ft. lbs. for the shaft and 50-70 ft. lbs for the clamp. Are these correct?
     
    ExpressEN1, Mar 22, 2007
    #2
  3. Mar 22, 2007
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,526
    yes
    those values are correct
     
    jpflat2a, Mar 22, 2007
    #3
  4. Mar 22, 2007
    ExpressEN1

    ExpressEN1 Member

    Central Arkansas
    Joined:
    Jan 20, 2007
    Messages:
    98
    I really appreciate it. Thanks:)
     
    ExpressEN1, Mar 22, 2007
    #4
New Posts