1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 18 CV Yoke- Will a Dana 20 Fit?

Discussion in 'Flat Fender Tech' started by mpc, Apr 24, 2007.

  1. Apr 24, 2007
    mpc

    mpc Member

    Vista, CA 92083...
    Joined:
    Aug 18, 2005
    Messages:
    779
    I'm switching to a cv rear drive shaft and I'm looking to buy the 10 spline cv yoke. I haven't found one for a Dana 18 transfer case, but I have for the Dana 20. I believe the 20 cv yoke will work for me, can anyone confirm that?
    Thanks a bunch.
     
    mpc, Apr 24, 2007
    #1
  2. Apr 24, 2007
    mpc

    mpc Member

    Vista, CA 92083...
    Joined:
    Aug 18, 2005
    Messages:
    779
    Last edited: Apr 8, 2008
    mpc, Apr 24, 2007
    #2
  3. Apr 25, 2007
    Dummy

    Dummy I kick hippies

    Escondido, CA
    Joined:
    Dec 5, 2004
    Messages:
    646
    I've done it before.
     
    Dummy, Apr 25, 2007
    #3
  4. Apr 25, 2007
    mpc

    mpc Member

    Vista, CA 92083...
    Joined:
    Aug 18, 2005
    Messages:
    779
    Okay. Thanks.
     
    mpc, Apr 25, 2007
    #4
  5. Apr 25, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    yup, i am using a yoke now that i have swapped between cases
     
    DanStew, Apr 25, 2007
    #5
  6. Apr 25, 2007
    Goose

    Goose New Member

    Vacaville,...
    Joined:
    Jan 13, 2005
    Messages:
    30
    I did it too on the front and the rear. If I remember right the CV yoke is out of an early bonco
     
    Goose, Apr 25, 2007
    #6
  7. Apr 26, 2007
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    As long as it's the 10 spline yoke it will work. Some of the real late 20's used something like a 26 spline yoke. Rare, but out there. Nickmil
     
    nickmil, Apr 26, 2007
    #7
  8. Apr 27, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    And if you look hard enoguh you can find a CV yoke for a dana 20 that will bolt onto a Dana 18. I believe they were from the Jeep trucks.
     
    DanStew, Apr 27, 2007
    #8
New Posts