1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Engine mount

Discussion in 'Intermediate CJ-5/6/7/8' started by frenchy, Aug 11, 2007.

  1. frenchy

    frenchy New Member

    Dropped the 360 in last night, but something seems not right.

    It seems as if the engine side bracket and the frame side bracket are at different angles ?
    And so the polyurethane motor mount in between is not fully squished in on both sides, the top of it hits both brackets, but the bottom is another 1/4 " or so away from the brackets.

    I have new engine and frame side brackets, as well as the motor mount in between. Am I missing another piece in here?
     
    Last edited: Aug 11, 2007
    frenchy, Aug 11, 2007
    #1
  2. jpflat2a

    jpflat2a what's that noise?

    both sets of brackets are handed, left and right.
    you are using CJ brackets, correct ?
     
    jpflat2a, Aug 11, 2007
    #2
  3. frenchy

    frenchy New Member

    Yup, CJ brackets, as far as I know...

    Driver side is smaller then passenger side frame mount, correct?
     
    frenchy, Aug 11, 2007
    #3