1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Hot Water

Discussion in 'Early Jeep Restoration and Research' started by Monkey Wrench, Jan 24, 2008.

  1. Jan 24, 2008
    Monkey Wrench

    Monkey Wrench Most junior member

    Buffalo, NY
    Joined:
    Oct 10, 2005
    Messages:
    34
    When did the factory switch from the flat top radiator (like m38a1), to round top version? Anybody know, or care? And should the hoses be smooth sided molded or ribbed flexy hose?
    Thanks.
     
    Monkey Wrench, Jan 24, 2008
    #1
  2. Jan 24, 2008
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    What year are you working on?
     
    blevisay, Jan 24, 2008
    #2
  3. Jan 24, 2008
    Monkey Wrench

    Monkey Wrench Most junior member

    Buffalo, NY
    Joined:
    Oct 10, 2005
    Messages:
    34
    early '55.
     
    Monkey Wrench, Jan 24, 2008
    #3
  4. Jan 26, 2008
    Brian P

    Brian P Member

    Clarkdale Arizona
    Joined:
    Nov 24, 2007
    Messages:
    650
    I dont know anything about the time line for radiator design change but the radiator in my 55 looks like it could be original, It is flat on top with very little slope from the filler neck towards the tank ends. Only the tank ends are rounded off some.
    Dont know about the hose design either but will share the smooth pre-formed hose part numbers from NAPA, Top 777..........Bottom 7728..........Bypass 789.
    If you are looking for a good last almost forever solution for the air cleaner hose try the NAPA 7820 radiator hose and trim both ends to correct length.
    Good Luck on your project.
     
    Brian P, Jan 26, 2008
    #4
New Posts