1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Stock Dash

Discussion in 'Early Jeep Restoration and Research' started by redsandman6, Jan 31, 2008.

  1. Jan 31, 2008
    redsandman6

    redsandman6 New Member

    Joined:
    Jan 31, 2008
    Messages:
    5
    i'm looking for a new dash with all of the stock hole drilled in it. everywhere (companys) i looked on the web. the company had a dash and the glove box was the only thing cut in the dash anyone have any ideas? i have tried googling but that did not work. the dash would be for a 1960 cj-5. all of the dashes we have, have extra holes and guages in them.
     
    redsandman6, Jan 31, 2008
    #1
  2. Feb 1, 2008
    duke54

    duke54 Member

    JACKMAN MAINE
    Joined:
    Apr 15, 2003
    Messages:
    319
    You should just take your time you will find not new but used,as far as a new one i dont think any one makes one with all the holes,willysoverland has a dash board but i'm not going there..:evil:
     
    duke54, Feb 1, 2008
    #2
  3. Feb 1, 2008
    Eric Haynie

    Eric Haynie New Member

    Joined:
    Jan 14, 2008
    Messages:
    6
    whats the thickness of the metal?
     
    Eric Haynie, Feb 1, 2008
    #3
  4. Feb 1, 2008
    duke54

    duke54 Member

    JACKMAN MAINE
    Joined:
    Apr 15, 2003
    Messages:
    319
    18 gauge i think not realy sure though.
     
    duke54, Feb 1, 2008
    #4
  5. Feb 2, 2008
    redsandman6

    redsandman6 New Member

    Joined:
    Jan 31, 2008
    Messages:
    5
    yeah i figured no one made one with the hole. i'll check around for a used one thanks for the help
     
    redsandman6, Feb 2, 2008
    #5
New Posts