1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Spline count

Discussion in 'Early CJ5 and CJ6 Tech' started by sammy, Oct 2, 2008.

  1. Oct 2, 2008
    sammy

    sammy Coca-Cola?

    Albuquerque, NM
    Joined:
    Jul 1, 2007
    Messages:
    1,577
    All, have a D44 from a 1969 1/2 CJ for my rear end in the 2A. It's got the tapered shafts and doesn't look to have ever been inside of, except for the brakes.
    I'm almost positive it's 19 spline, but could be wrong?
    Is there a way to check without tearing it down?
    TIA
     
    sammy, Oct 2, 2008
    #1
  2. Oct 2, 2008
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    nope
    if you are 100% positive of the Jeep it came from, then they are 19 spline factory.
     
    jpflat2a, Oct 2, 2008
    #2
  3. Oct 2, 2008
    sammy

    sammy Coca-Cola?

    Albuquerque, NM
    Joined:
    Jul 1, 2007
    Messages:
    1,577
    They're from board member 1970CJ6, I'll maybe see if he knows?
     
    sammy, Oct 2, 2008
    #3
  4. Oct 3, 2008
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    they gotta be 19 spline, only early ones where 10 spline up to 65 maby? You could pull the cover and check:) Looking for axles to go with that power loc are you?:)
     
    windyhill, Oct 3, 2008
    #4
  5. Oct 3, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    sparky, Oct 3, 2008
    #5
  6. Oct 3, 2008
    1970CJ6

    1970CJ6 new mexico air

    rio rancho, new...
    Joined:
    Nov 29, 2005
    Messages:
    630
    Never pulled the axles, only removed the hubs to do the brakes. The CJ6 was built in late 69.

    Andrew
     
    1970CJ6, Oct 3, 2008
    #6
New Posts