1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Battery holddown question

Discussion in 'Early Jeep Restoration and Research' started by schardein, Oct 21, 2004.

  1. Oct 21, 2004
    schardein

    schardein Low Range Therapy

    Success, MO
    Joined:
    Aug 11, 2003
    Messages:
    553
    I saw a picture of a lime green renegade once. On the battery holddown, on the passenger side, there was a bracket that ran from the top of the battery holddown bolt to the firewall. When I say holddown bolt I mean the actual long threaded rod. I have the hole in the firewall right where it would go.

    Does anyone know if this bracket is stock? If so anyone have a closeup pic?

    It looks like I could fab something from 1/8" thick by 1" wide strap steel pretty easy. Couple bends drill a couple holes.

    Also, later model CJs had a bracket on both sides (that come from the bottom of the tray), while my early cj just has the bracket on the driver side. The later CJ bracket looks like it would bolt up using that extra hole and maybe be a little stronger. Anyone tried it to see if it fits?

    Thanks
     
  2. Oct 21, 2004
    John A. Shows

    John A. Shows I shouldna sold my 69 CJ5...

    Mendenhall...
    Joined:
    Sep 24, 2002
    Messages:
    938
    My battery tray is stock. Check my webshots album for pics.
     
  3. Oct 21, 2004
    dg69

    dg69 New Member

    left coast
    Joined:
    Sep 13, 2004
    Messages:
    23
    yes that L bracket come stock. also the newer style battery box will bolt up to existing holes with no modifications. i replaced my original one last winter with a newer style.

    here's a pic. of the new one.............


    [​IMG]
     
  4. Oct 22, 2004
    schardein

    schardein Low Range Therapy

    Success, MO
    Joined:
    Aug 11, 2003
    Messages:
    553
    dg, bolts right in....I thought so.....

    John, I've looked at your album several times....that engine looks GOOD. I don't see a good shot of the battery tray though.

    I am asking this because since I have fenderwell headers, one of the braces on the bottom of the tray can't be used. It still feels plenty sturdy, but I would go to the new style just to be safe...future plans call for stock manifolds and exhaust, which means I'll be able to reinstall the brace...in either event I will probably fab the L bracket once a get a good pic of it.
     
  5. Oct 22, 2004
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    looks like the tray in mine.
     
  6. Oct 22, 2004
    dg69

    dg69 New Member

    left coast
    Joined:
    Sep 13, 2004
    Messages:
    23
    when i install my headers i used a hot wrench to bend the lower brace to clear the headers works fine.

    here's a picture from the fsm of the L brack your looking for.


    [​IMG]
     
  7. Oct 22, 2004
    schardein

    schardein Low Range Therapy

    Success, MO
    Joined:
    Aug 11, 2003
    Messages:
    553
    Y'know, I found that pic last night, but I am talking about the other side! I will have to check my firewall again, but I am 98% sure I don't have a hole for the L bracket in that pic. DG, it doesn't look like you do either. I do have the hole on the other side that is slightly higher, that the newer battery tray bolts to. My stock tray doesn't have a bracket to the firewall on the pass side, so that hole is empty.

    The renegade pic I saw had a similar L bracket on the pass side, that is the one I am going to fabricate.
     
  8. Oct 22, 2004
    James P. Enderwies

    James P. Enderwies Sponsor

    Lake Havasu City, AZ
    Joined:
    Feb 2, 2003
    Messages:
    747
    Greg: You mean this one?
     
  9. Oct 23, 2004
    schardein

    schardein Low Range Therapy

    Success, MO
    Joined:
    Aug 11, 2003
    Messages:
    553
    Jim, you the man.

    My battery is a little shorter, so I think I am going to end up with about a 45 degree bend at the top and bottom.

    Jim, let me ask you this--Does the battery holddown bolt on the driver side run inside or outside the brace that bolts to the firewall? mine is on the outside but seems like maybe it should be on the inside.

    Thanks guys for all the responses. I love this board.
     
  10. Oct 23, 2004
    James P. Enderwies

    James P. Enderwies Sponsor

    Lake Havasu City, AZ
    Joined:
    Feb 2, 2003
    Messages:
    747
    Greg: Mine's on the outside also. And I have only 1 brace under the tray that's sort of on the drivers side. Diidn't know that there was supposed to be 2. :shock: But it does seem sturdy and clears the headers. It's good to know if you need a new one, the later models will bolt right in. :)
     
New Posts