1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

scout Dana 44 spindle work on CJ Dana 44?

Discussion in 'Early CJ5 and CJ6 Tech' started by cj5_327, Oct 1, 2010.

  1. Oct 1, 2010
    cj5_327

    cj5_327 New Member

    Phoenix
    Joined:
    Sep 23, 2010
    Messages:
    43
    Will a Scout II Spindle/rear hub work on a Dana 44 from my 1965 CJ-5?

    I'm starting to put together the parts for the full floater conversion
     
    cj5_327, Oct 1, 2010
    #1
  2. Oct 1, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    The front wheel bearing hub will work. The scout 2 Dana 44 spindles use 8 bolts to retain them not 6 like the Jeep. They can be re-drilled however. The Scout 2 Dana 30 drum brake spindles were 6 bolt just like Jeep.
    The Scout 2 didn't use a hub in the rear. They had flanged axles so not sure what you are asking here.
    Realize that the spindles must be machined to work regardless.
     
    nickmil, Oct 1, 2010
    #2
New Posts