1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

piston rings

Discussion in 'Intermediate CJ-5/6/7/8' started by linkwhy, Jun 24, 2011.

  1. Jun 24, 2011
    linkwhy

    linkwhy Member

    Joined:
    Jun 7, 2007
    Messages:
    67
    i have a stock 1972 stock bore can anyone tell me the thickness of the rings i found a set from summit but they don't specify the motor they fit they only say v-8 the thicknesses are 5/64- 5/64-3/16 can anyone help thanks sorry it's a 304
     
    Last edited: Jun 24, 2011
    linkwhy, Jun 24, 2011
    #1
  2. Jun 24, 2011
    Pack Rat

    Pack Rat Old Timer

    I live in a...
    Joined:
    Apr 1, 2006
    Messages:
    1,512
    Can't find anything in the manual on ring thickness but groove height is .0795 to .0805 for the compression rings and .1880 to .1895 for the oil control so they would be in the correct range dimensionally. 5/64=.078125, 3/16=.1875
    Assuming your bores have no taper/out of round/gouges/scratches that would require machining?
     
    Last edited: Jun 24, 2011
    Pack Rat, Jun 24, 2011
    #2
New Posts