1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

AMC V8 Distrubutor setting

Discussion in 'Intermediate CJ-5/6/7/8' started by IrishCJ6, Jul 13, 2011.

  1. Jul 13, 2011
    IrishCJ6

    IrishCJ6 Member

    Wicklow Ireland
    Joined:
    Dec 6, 2010
    Messages:
    437
    Ok I want to install my nice new HEI dizzy into the 360, I'm going to set the old one at TDC No. 1 and mark the position of the rotor etc, however on pulling the old cap I find there is no rotor arm. Can anyone tell me where the keyway sits on the rotor arm, i.e. at the front or the rear of the arm.
     
    IrishCJ6, Jul 13, 2011
    #1
New Posts