As I understand it, the 2psi residual pressure valve is only used in systems where the master cylinder is at or below the level of the brake...
Muffler shop should have them. Common to a lot of different cars.
Of course you can measure relative distances off the screen. Two objects at the same distance will be proportionally the same. Not a difficult...
Detergent I used - https://zep.com/products/industrial-purple-cleaner-and-degreaser-concentrate-r45810 I'm sure you could use whatever you have...
If one will bolt on, the other will not. Measure the bolt circle. I put my ruler on the screen, and the left bolt circle is 45 mm and the center...
Welcome from eastern Massachusetts. WHich is which? F-100 is not a bolt-on option for a Jeep. They can be made to work, but I'm not sure what's...
The PO added that (those?) to the swing-away. IMO those swing-away carriers are barely adequate for a factory sized tire, much less an added jerry...
going over this, I noticed your comment. Use a search engine like Google or Bing to search the site. For example,...
Factory wheels have ca 3.5" backspacing. Disk brakes were optional then standard starting in 1977, and I would expect any factory wheels from that...
It is possible to rebuild the Trak-Lok. They work pretty well as limited slip when new, and are very well-mannered on pavement. They have a...
Junkyard. Or fab. Nobody's going to make an aftermarket replacement for a part that does not wear out from an oddball car. Jeep PN 987877 - maybe...
Note that disk brakes were optional in 1977; first year for disks. They are offering a different hose for drums vs. disks.
Do you have the original hose? Seems more likely the hose from a '77 would work rather than for a '73.
Separate names with a comma.
