1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dual Matic Overdrive-

Discussion in 'Early CJ5 and CJ6 Tech' started by jeepermc, Apr 7, 2014.

  1. Apr 7, 2014
    jeepermc

    jeepermc Active Member

    Western WA
    Joined:
    May 25, 2011
    Messages:
    1,192
    Soo.....I thought I had a Warn OD under one of my FC's.... I pulled it this weekend to put to use in the Perkins CJ-6. Verified tooth count at 29, spline at 6 and commenced to cleaning it up on my lunch break at work today. Of course it was covered in old jeep dirt and grease so when I got the tag cleaned up I discovered it was a Dual Matic. I know AA says parts do not cross, this one needs very little if anything but seals.. Does anyone have a parts breakdown for a Dual Matic? I think it was installed "backyard style" as there was no retaining ring or clip to hold the nut, the top spacer washer was missing, etc. Everything else looks fine so far but I haven't completely disassembled it yet either. Who has experience with the Dual Matic? And have you found any parts sources or interchangeable parts with the Warn?
     
    jeepermc, Apr 7, 2014
    #1
  2. Apr 7, 2014
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    timgr, Apr 7, 2014
    #2
  3. Apr 7, 2014
    jeepermc

    jeepermc Active Member

    Western WA
    Joined:
    May 25, 2011
    Messages:
    1,192
    Already e-mailed Herm. Will probably have to sort everything out after Easter Jeep safari.
     
    jeepermc, Apr 7, 2014
    #3
  4. Apr 8, 2014
    jeepermc

    jeepermc Active Member

    Western WA
    Joined:
    May 25, 2011
    Messages:
    1,192
    Herm says he has most of the stuff for a Dual Matic as well. Good news there.
     
    jeepermc, Apr 8, 2014
    #4
New Posts