1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Battery Holder Question

Discussion in 'Early CJ5 and CJ6 Tech' started by Johns1967CJ5, Mar 17, 2018.

  1. Johns1967CJ5

    Johns1967CJ5 Sponsor

    Saw this on ebay, is it the same as the one that would have been on my 67 ?

    [​IMG]
     
    Johns1967CJ5, Mar 17, 2018
    #1
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Looks like the one for an intermediate CJ. If you have a battery tray of that style, I suggest you get the tray for a '76 or newer CJ. It's not exactly the same, but it's pretty close and can be made to work. It clamps to the base of the battery instead of using the threaded rods and bar across the top. Rugged Ridge 11214.01 Cj7 Battery Tray | eBay
     
    timgr, Mar 17, 2018
    #2
    ojgrsoi and Johns1967CJ5 like this.
  3. Bowbender

    Bowbender I'm workin' on it!

    It's pretty close John, mine only has one brace going up and two going down. The hold down is the same.IMG 20180317 141444 752
     
    Bowbender, Mar 17, 2018
    #3
    Johns1967CJ5 likes this.
  4. Muzikp

    Muzikp Active Member

    Out of my 67. I have one bracket going up and one going down to the very bottom of the fenderwell and two bolts at the back of the tray that attach to firewall.

    [​IMG]

    [​IMG]

    [​IMG]
     
    Muzikp, Mar 20, 2018
    #4
    ojgrsoi and Danefraz like this.
  5. Jonbbrew

    Jonbbrew Member

    On a side note, can you send me a picture of your other offy valve cover as i have the same ones and wanted to see your venting set up. Thanks!
     
    Jonbbrew, Mar 27, 2018
    #5
  6. Muzikp

    Muzikp Active Member

    Hose connects to a port on the air filter.

    [​IMG]
     
    Muzikp, Mar 29, 2018
    #6
    Jonbbrew likes this.