1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

New Shed

Discussion in 'The Tool Shed' started by Steve's 70-5, Feb 23, 2020.

  1. Feb 23, 2020
    Steve's 70-5

    Steve's 70-5 Active Member 2020 Sponsor

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,326
    Building a new shed to replace the old one. We have a 8 x 10 now, was going to up size to a 8 x 12. We are now building a 10 x 16. The yard falls off where we are putting it, so I poured some piers for it to sit on. Got the floor system built. Used 3 5/8 inch, 16 gauge metal studs, 16 inches on center. It has been raining so much here, don't know when I will be able to start framing.


    [​IMG]

    [​IMG]

    [​IMG]
     
    Glenn, 58 willys, TuxParkIV and 3 others like this.
  2. Feb 23, 2020
    Twin2

    Twin2 not him 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,132
    metal studs . that's one way to beat termites
    moisture barrier . good idea
     
    Glenn, TuxParkIV and Focker like this.
  3. Feb 23, 2020
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    11,745
    Looks good! I like the size too.
     
  4. Feb 24, 2020
    Fireball

    Fireball Well-Known Member 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    3,731
    I'm impressed you got your concrete pier tops level enough to build right on top of them. Nice job.
     
  5. Feb 24, 2020
    jackdog

    jackdog Member 2021 Sponsor 2020 Sponsor

    Finger Lakes NY
    Joined:
    Jul 16, 2013
    Messages:
    485
    I've never used metal studs but have thought about it often. Would weight be a problem over a 10' span?
     
  6. Feb 24, 2020
    Steve's 70-5

    Steve's 70-5 Active Member 2020 Sponsor

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,326
    Using 16 gauge which are pretty stout. Once plywood is on floor, this will spread the weight out. It is just for lawn mowers and lawn stuff. Should not be that much heavy stuff, if it is heavy will put close to exterior walls.
     
  7. Mar 8, 2020
    Steve's 70-5

    Steve's 70-5 Active Member 2020 Sponsor

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,326
    Got the plywood floor down, covered it up with plastic, since it will be raining a few days this week. I can now make the trusses for the roof. Will build a template on the floor and then nail the trusses together.

    [​IMG]
     
    jeeper50 likes this.
  8. Mar 28, 2020
    Steve's 70-5

    Steve's 70-5 Active Member 2020 Sponsor

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,326
    Made the trusses for the roof. Finally got some good weather, stood up some walls. Put the siding on the rear wall.

    [​IMG]

    [​IMG]


    [​IMG]

    [​IMG]

    [​IMG]
     
  9. Mar 28, 2020
    wheelie

    wheelie beeg dummy 2021 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,135
    Looking good.
     
  10. Mar 31, 2020
    Steve's 70-5

    Steve's 70-5 Active Member 2020 Sponsor

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,326
    Got the trusses set. Used some fasteners my wife got cheap. Was a neat, easy install.


    [​IMG]

    [​IMG]

    [​IMG]
     
    jeeper50 and Twin2 like this.
  11. May 9, 2020
    Steve's 70-5

    Steve's 70-5 Active Member 2020 Sponsor

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,326
    Got the shed done, poured the apron today. All I have to do is move stuff from the old shed to the new one

    [​IMG]

    [​IMG]

    [​IMG]
     
    timgr, matt johnson, Lockman and 3 others like this.
  12. May 11, 2020
    jeeper50

    jeeper50 jeeps 'till I die

    Gawja
    Joined:
    Dec 20, 2007
    Messages:
    765
    Great job! Is the the door on the right the MIL suite?
     
    Twin2 likes this.
  13. May 11, 2020
    matt johnson

    matt johnson Caretaker of family Jeeps 2021 Sponsor 2020 Sponsor

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    214
    Very nice!!
     
  14. May 11, 2020
    Steve's 70-5

    Steve's 70-5 Active Member 2020 Sponsor

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,326
    Bicycle storage
     
    jeeper50 likes this.
New Posts