1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Transmission Mount Data

Discussion in 'Early CJ5 and CJ6 Tech' started by Roboter, May 29, 2006.

  1. May 29, 2006
    Roboter

    Roboter Klaatu Barada Jeepto

    Loomis California
    Joined:
    Apr 13, 2005
    Messages:
    316
    Please tell me what book this pic came out of. Unless I'm blind, I cant find it in the FSM or Chiltons. :?

    Thanks
     
  2. May 29, 2006
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,381
    I'd say it's from a parts manual.
     
  3. May 29, 2006
    Roboter

    Roboter Klaatu Barada Jeepto

    Loomis California
    Joined:
    Apr 13, 2005
    Messages:
    316
    FPM?
     
  4. May 29, 2006
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,381
    I don't have one, but I'd assume so.
     
  5. May 29, 2006
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Yes.
     
  6. May 29, 2006
    tommy b

    tommy b Member

    Golden, Colorado
    Joined:
    Oct 23, 2005
    Messages:
    341
    Is it just me, or is the picture slightly wrong? Shouldn't the upper half of item 18.210-1 either be upside down from what's shown, or, if installed in the position shown, be located under the U channel? I believe that the shoulder on the rubber piece should fit inside the hole in the channel so that it doesn't slide sideways and let the bolt (18-210-2) contact the metal and transfer noise and vibration. At least, that's the way I've always installed vibration isolators. :?

    tommy b
     
New Posts