1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Lets see some pics of your Panhead bar

Discussion in 'Builds and Fabricators Forum' started by DanStew, Jan 20, 2007.

  1. Jan 20, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I am debating on running a panhead bar in th efront of the jeep to get it a little more stable on the road. it really isnt too bad now, but after reading a bunch about the subject i am thinknig bout making one. I am curious to see pics of them installed on a CJ5, and generally to give me ideas and motivation to make one up.
     
    DanStew, Jan 20, 2007
    #1
  2. Jan 20, 2007
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    You mean Panhard?
     
    Patrick, Jan 20, 2007
    #2
  3. Jan 20, 2007
    Dummy

    Dummy I kick hippies

    Escondido, CA
    Joined:
    Dec 5, 2004
    Messages:
    646
    Dan, I doubt you're going to run into very many people running a panhard on an early CJ unless they've converted to leaf springs. Your best bet is probably going to be checking out a YJ design and copying it as best as the differential location allows (since the YJ's is on the driver's side). I know we've gone over it before, but just remember to keep the panhard the exact same length and run it at the exact same angle as the drag link to prevent bumpsteer.
     
    Dummy, Jan 20, 2007
    #3
  4. Jan 20, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Thanks for the info, from what i have been reading that is what i have been hearing also. I will still get a drop pitman arm first and see how much that does. My issue i have with my setup with YJ springs si the monuts i got, they are about 1/4 inch wider than the springs on each side, i have to crank them down to get it to close, and it is in my opinion that if they are totally cranked down then you will bind up the springs from moving by having it too tight. I may be thinknig about it wrong, not like i have that much space but i have enough that i could see the springs maybe shifting side to side a little and that possibly add some issues to a wandering jeep.

    And with my springs being so new, i guess i have to make the bar adjustable so i can compensate for when the springs sag over time. Are the stock bars adjsutable or solid?
     
    DanStew, Jan 20, 2007
    #4
  5. Jan 21, 2007
    Dummy

    Dummy I kick hippies

    Escondido, CA
    Joined:
    Dec 5, 2004
    Messages:
    646
    Just reread my post. I meant to say "converting to coil springs" but I'm sure you all knew what I meant.

    Stock YJ, TJ, and XJ panhards are fixed length. There are aftermarket adjustable ones out there. If you're looking to do an adjustable length, just weld in a threaded insert or tap the appropriate i.d. tubing on one end for a rod end when you build it. Then you'll have about an inch of adjustment. That should be more than you need. You don't need to adjust the panhard length for the springs settling because the drag link is going to come down the same amount. As long as you build it the same length and angle as the drag link to begin with you shouldn't have to touch it ever again. The adjustable track bars are really for re-centering the axle after a lift since the resulting greater distance between the frame and axle pulls the axle to the passenger side.

    I'd grab some tubing and the chop saw to make up some spacers for your springs before messing with a track bar. Having the spring hangers that much larger than the springs can easily lead to wander issues. The spacers should help a lot.
     
    Dummy, Jan 21, 2007
    #5
  6. Jan 21, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    thats true, didnt really think bout just shimmnig the mounts out. i will do that one first and go from there.

    thanks
     
    DanStew, Jan 21, 2007
    #6
  7. Jan 22, 2007
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    I don't have a bar on my panhead, but I ride it to a bar.
    Does that count?:)
     
    1960willyscj5, Jan 22, 2007
    #7
  8. Jan 25, 2007
    Rondog

    Rondog just hangin' out

    Parker, CO
    Joined:
    Aug 25, 2005
    Messages:
    2,918
    Man, I remember those days!!! Wish I had another panhead....sure hit lots o' bars with my old '56. Bought it for $700.
     
    Rondog, Jan 25, 2007
    #8
New Posts