Seperating T96 from D18

Trying to add 2 sticks to my t/c but having issues seperating t/c from trans. I have loosened all bolts between the two, it seperates a little but I see that something is preventing seperation. I have an overdrive installed and removed it and the retainer keeper and star looking gizmo. There is another hex looking keeper in there, does it need to be removed? I'm missing something I know and learning on the job. thanks



https://picasaweb.google.com/115996...key=Gv1sRgCNb7k__iurit6gE#5706910830016429426


Steve

 

achuto go to herm the overdrive guy web site , yes the gear has to be removed
http://www.hermtheoverdriveguy.com/

 

T-86?

 

Sorry, mistaken, PO says T-98. Looking at parts list it looks like I need to remove "drive nut" ? Hex looking nut.....big a$$ allen wrench work?

 

Even though it looks kind of like a hex it's actually a square drive. A 1/2" drive extension works well here.


Sent from my iPhone using Tapatalk

 

Thanks for the advice, helps alot when the correct tools are used.. Even had the old OD to look at but still couldn't fit round peg into square hole!


Steve