1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

heater leak ?

Discussion in 'Early CJ5 and CJ6 Tech' started by rossbos, Feb 27, 2010.

  1. Feb 27, 2010
    rossbos

    rossbos Member

    everett wa.
    Joined:
    Nov 10, 2002
    Messages:
    230
    Huge mess all over garage floor. The hose from the water pump is 3/4" and the hose from the intake manifold is 5/8". Why are both connections to the heater core for 5/8" hose. I thought I could tighten the 3/4" hose to the 5/8" inlet down tight enough to keep it from leaking. I was wrong. What is the cure for this and why wasn't a 3/4" inlet provided.
     
    rossbos, Feb 27, 2010
    #1
  2. Feb 27, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Stretch a 5/8" hose over the water pump bib and just use the 5/8". Been running mine this way for 12 years.
     
    Patrick, Feb 27, 2010
    #2
  3. Feb 27, 2010
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Inline adapters from 3/4" to 5/8" are available on the HELP pegs at your FLAPS, IIRC. Or look on the Dorman web page. The fittings for the water pump or manifold are also available in 3/4" and 5/8"... whichever is more convenient. A good FLAPS can help you with this.
     
    timgr, Feb 27, 2010
    #3
  4. Feb 27, 2010
    Hawkes

    Hawkes Member

    Nova scotia
    Joined:
    Jun 18, 2003
    Messages:
    490
    Same here, or I changed out the nipple, can't remember now.
     
    Hawkes, Feb 27, 2010
    #4
  5. Feb 27, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    The nipple on the water pump is part of the water pump. Apparently these came from the factory with 3- 5/8" bibs and one 3/4" bib. Wonder if the original heater hose compensated for it..
     
    Patrick, Feb 27, 2010
    #5
  6. Feb 27, 2010
    rossbos

    rossbos Member

    everett wa.
    Joined:
    Nov 10, 2002
    Messages:
    230
    Went to auto parts store and got a 3/4" to 5/8" adapter and cut it in about half way between water pump and heater core. Problem solved. I wonder how the problem was solved at the factory. The water pump definatly has a 3/4" outlet and the two heater cores I have deinatly have two 5/8" openings.
     
    rossbos, Feb 27, 2010
    #6
  7. Feb 27, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    That'll work. Like I said, I don't know how the factory heater hoses were, but both of mine, and my dad's, all had the 5/8" pushed on to the 3/4" nipple on the W/P, and that's how I re-did them.
     
    Patrick, Feb 27, 2010
    #7
New Posts